* Proof FIXED_FIXED_CONSTANT_POOL (#207) * wip(pp. 1420-1425): Proof IMU_MODE_SWITCHING_ROUTINES #213 * done(pp. 1420-1448): Proof IMU_MODE_SWITCHING_ROUTINES #213
This commit is contained in:
Glenn Dwiyatcita
committed by
James Harris
James Harris
parent
84a2142316
commit
6fc2636146
@@ -35,7 +35,7 @@
|
||||
|
||||
EBANK= COMMAND
|
||||
|
||||
# FIXED-FIXED ROUTINES
|
||||
# FIXED-FIXED ROUTINES.
|
||||
|
||||
COUNT 02/IMODE
|
||||
|
||||
@@ -57,7 +57,7 @@ SPSCODE = BIT9
|
||||
COUNT 07/IMODE
|
||||
|
||||
IMUZERO INHINT # ROUTINE TO ZERO ICDUS.
|
||||
CS DSPTAB +11D # DON'T ZERO CDUS IS IMU IN GIMBAL LOCK AND
|
||||
CS DSPTAB +11D # DONT ZERO CDUS IS IMU IN GIMBAL LOCK AND
|
||||
MASK BITS4&6 # COARSE ALIGN (GIMBAL RUNAWAY PROTECTION)
|
||||
CCS A
|
||||
TCF IMUZEROA
|
||||
@@ -68,9 +68,7 @@ IMUZERO INHINT # ROUTINE TO ZERO ICDUS.
|
||||
TCF CAGETSTJ +4 # IMMEDIATE FAILURE.
|
||||
|
||||
IMUZEROA TC CAGETSTJ
|
||||
|
||||
# DO ALL THE WORK.
|
||||
|
||||
CS IMODES33 # DISABLE DAP AUTO AND HOLD MODES
|
||||
MASK SUPER011 # BIT5 FOR GROUND
|
||||
ADS IMODES33
|
||||
@@ -152,7 +150,7 @@ COARS TC CAGETEST
|
||||
CAF TWO # SET CDU INDICATOR
|
||||
COARS1 TS CDUIND
|
||||
|
||||
INDEX CDUIND # COMPUTE THETAD -- THETAA IN 1'S
|
||||
INDEX CDUIND # COMPUTE THETAD - THETAA IN 1:S
|
||||
CA THETAD # COMPLEMENT FORM
|
||||
EXTEND
|
||||
INDEX CDUIND
|
||||
@@ -174,9 +172,9 @@ COARS1 TS CDUIND
|
||||
TC VARDELAY
|
||||
|
||||
# Page 1424
|
||||
COARS2 TC CAGETEST # DON'T CONTINUE IF CAGED.
|
||||
COARS2 TC CAGETEST # DONT CONTINUE IF CAGED.
|
||||
TS ITEMP1 # SET TO +0.
|
||||
CAF TWO # SET CDU INDICATOR.
|
||||
CAF TWO # SET CDU INDICATOR
|
||||
+3 TS CDUIND
|
||||
|
||||
INDEX CDUIND
|
||||
@@ -207,6 +205,7 @@ NEXTCDU INCR ITEMP1
|
||||
TC FIXDELAY # WAIT FOR GIMBALS TO SETTLE.
|
||||
DEC 150
|
||||
|
||||
|
||||
CAF TWO # AT END OF COMMAND, CHECK TO SEE THAT
|
||||
CHKCORS TS ITEMP1 # GIMBALS ARE WITHIN 2 DEGREES OF THETAD.
|
||||
INDEX A
|
||||
@@ -222,7 +221,7 @@ CHKCORS TS ITEMP1 # GIMBALS ARE WITHIN 2 DEGREES OF THETAD.
|
||||
# Page 1425
|
||||
CORSCHK2 CCS ITEMP1
|
||||
TCF CHKCORS
|
||||
TCF ENDIMU # END OF COARSE ALIGNMENT
|
||||
TCF ENDIMU # END OF COARSE ALIGNMENT.
|
||||
|
||||
COARSERR AD COARSTOL # 2 DEGREES.
|
||||
EXTEND
|
||||
@@ -235,6 +234,7 @@ COARSERR AD COARSTOL # 2 DEGREES.
|
||||
|
||||
COARSTOL DEC -.01111 # 2 DEGREES SCALED AT HALF-REVOLUTIONS
|
||||
|
||||
|
||||
COMNEG AD -COMMAX
|
||||
EXTEND
|
||||
BZMF COMZERO
|
||||
@@ -255,6 +255,7 @@ SENDPULS CAF 13,14,15
|
||||
CAF 600MS
|
||||
TCF COARS2 -1 # THEN TO VARDELAY
|
||||
|
||||
|
||||
CA+ECE CAF BIT6 # ENABLE ALL THREE ISS CDU ERROR COUNTERS
|
||||
EXTEND
|
||||
WOR CHAN12
|
||||
@@ -341,10 +342,10 @@ IMUFINED TC CAGETEST # SEE THAT NO ONE HAS CAGED THE IMU.
|
||||
TCF ENDIMU
|
||||
|
||||
# Page 1428
|
||||
IFAILOK TC CAGETSTQ # ENABLE IMU FAIL UNLESS IMU BEING CAGED.
|
||||
IFAILOK TC CAGETSTQ # ENABLE IMU FIAL UNLESS IMU BEING CAGED.
|
||||
TCF TASKOVER # IT IS.
|
||||
|
||||
CAF BIT4 # DON'T RESET IMU FAIL INHIBIT IF SOMEONE
|
||||
CAF BIT4 # DONT RESET IMU FAIL INHIBIT IF SOMEONE
|
||||
EXTEND # HAS GONE INTO COARSE ALIGN.
|
||||
RAND CHAN12
|
||||
CCS A
|
||||
@@ -401,12 +402,12 @@ PIPFREE2 TC IBNKCALL # ISS WARNING MIGHT COME ON NOW.
|
||||
|
||||
TCF MODEEXIT
|
||||
|
||||
PIPFREE INHINT # PROGRAM DONE WITH PIPAS. DON'T LIGHT
|
||||
PIPFREE INHINT # PROGRAM DONE WITH PIPAS. DONT LIGHT
|
||||
CS IMODES30 # ISS WARNING.
|
||||
MASK BIT1
|
||||
ADS IMODES30
|
||||
|
||||
MASK BIT10 # IF PIP FAIL ON, DO PROG ALARM AND RESET
|
||||
MASK BIT10 # IF PIP FAIL ON, DO PROG ALSRM AND RESET
|
||||
CCS A # ISS WARNING.
|
||||
TCF MODEEXIT
|
||||
|
||||
@@ -469,7 +470,7 @@ GYROAGRE TS MPAC +3
|
||||
TCF MODEEXIT
|
||||
|
||||
# Page 1431
|
||||
# ROUTINES TO ALLOW TORQUING ONLY ONE JOB AT A TIME.
|
||||
# ROUTINES TO ALLOW TORQUING BY ONLY ONE JOB AT A TIME.
|
||||
|
||||
GYROBUSY EXTEND # SAVE RETURN 2FCADR.
|
||||
DCA BUF2
|
||||
@@ -517,7 +518,7 @@ STRTGYR2 CA LGYRO # JUMP ON PHASE COUNTER IN BITS 13-14.
|
||||
CAF LGWAKE # WAKE A POSSIBLE SLEEPING JOB.
|
||||
TC JOBWAKE
|
||||
|
||||
NORESET TCF IMUFINED # DO NOT RESET POWER SUPPLY.
|
||||
NORESET TCF IMUFINED # DO NOT RESET POWER SUPPLY
|
||||
# Page 1433
|
||||
-2 CS FOUR # SPECIAL ENTRY TO REGRESS LGYRO FOR X.
|
||||
ADS LGYRO
|
||||
@@ -667,7 +668,7 @@ MAJ- EXTEND # DEFINITE NEGATIVE OUTPUT.
|
||||
|
||||
CS RUPTREG1 # SET UP RUPTREGS TO FALL INTO GMERGE.
|
||||
TS RUPTREG1 # ALL NUMBERS PUT INTO GYROCMD ARE
|
||||
CS RUPTREG2 # POSITIVE -- BIT9 OF CHAN 14 DETERMINES
|
||||
CS RUPTREG2 # POSITIVE - BIT9 OF CHAN 14 DETERMINES
|
||||
MASK LOW7 # THE SIGN OF THE COMMAND.
|
||||
COM
|
||||
XCH RUPTREG2
|
||||
@@ -708,6 +709,7 @@ CAGETSTJ CS IMODES30 # IF DURING MODE SWITCH INITIALIZATION.
|
||||
MASK BIT6 # IT IS FOUND THAT THE IMU IS BEING CAGED.
|
||||
CCS A # SET IMUCADR TO -0 TO INDICATE OPERATION
|
||||
TC Q # COMPLETE BUT FAILED. RETURN IMMEDIATELY
|
||||
|
||||
CS ZERO # TO SWRETURN.
|
||||
TS IMUCADR
|
||||
TCF MODEEXIT
|
||||
@@ -726,7 +728,7 @@ GOODEND TS RUPTREG2
|
||||
TS RUPTREG3
|
||||
INDEX RUPTREG2 # SEE IF USING PROGRAM ASLEEP.
|
||||
CCS MODECADR
|
||||
TCF +2 # YES -- WAKE IT UP.
|
||||
TCF +2 # YES - WAKE IT UP.
|
||||
TCF ENDMODE # IF 0, PROGRAM NOT IN YET.
|
||||
|
||||
CAF ZERO # WAKE SLEEPING PROGRAM.
|
||||
@@ -741,54 +743,54 @@ GOODEND TS RUPTREG2
|
||||
TCF TASKOVER
|
||||
|
||||
ENDMODE CA RUPTREG3 # -0 INDICATES OPERATION COMPLETE BUT
|
||||
INDEX RUPTREG2 # UNSUCCESSFUL: -1 INDICATES COMPLETE AND
|
||||
INDEX RUPTREG2 # UNSUCCESSFUL - -1 INDICATES COMPLETE AND
|
||||
TS MODECADR # SUCCESSFUL.
|
||||
TCF TASKOVER
|
||||
|
||||
# Page 1440
|
||||
# GENERAL STALLING ROUTINE. USING PROGRAMS COME HERE TO WAIT FOR I/O COMPLETION.
|
||||
#
|
||||
# PROGRAM DESCRIPTION DATE -- 21 FEB 1967
|
||||
|
||||
# PROGRAM DESCRIPTION DATE- 21 FEB 1967
|
||||
# LOG SECTION IMU MODE SWITCHING
|
||||
# MOD BY -- R. MELANSON TO ADD DOCUMENTATION ASSEMBLY SUNDISK REV. 82
|
||||
#
|
||||
# FUNCTIONAL DESCRIPTION --
|
||||
# MOD BY- R.MELANSON TO ADD DOCUMENTATION ASSEMBLY SUNDISK REV. 82
|
||||
|
||||
# FUNCTIONAL DESCRIPTION-
|
||||
# TO DELAY FURTHER EXECUTION OF THE CALLING ROUTINE UNTIL ITS SELECTED
|
||||
# I/O FUNCTION IS COMPLETE. THE FOLLOWING CHECKS ON THE CALLING ROUTINES
|
||||
# MODEECADR ARE MADE AND ACTED UPON.
|
||||
# MODECADR ARE MADE AND ACTED UPON.
|
||||
# 1) +0 INDICATES INCOMPLETE I/O OPERATION.CALLING ROUTINE IS PUT TO
|
||||
# SLEEP.
|
||||
# 2) -1 INDICATES COMPLETED I/O OPERATION. STALL BYPASSES JOBSLEEP
|
||||
# CALL AND RETURNS TO CALLING ROUTINE AT L+3.
|
||||
# CALL AND RETURNS TO CALLING ROUTINE AT L+3
|
||||
# 3) -0 INDICATES COMPLETED I/O WITH FAILURE. STALL CLEARS MODECADR
|
||||
# AND RETURNS TO CALLING ROUTINE AT L+2.
|
||||
# 4) VALUE GREATER THAN 0 INDICATES TWO ROUTINES CALLING FOR USE OF
|
||||
# SAME DEVICE. STALL EXITS TO ABORT WHICH EXECUTES A PROGRAM
|
||||
# RESTART WHICH IN TURN CLEARS ALL MODECADR REGISTERS.
|
||||
#
|
||||
# CALLING SEQUENCE --
|
||||
|
||||
# CALLING SEQUENCE-
|
||||
# L TC BANKCALL
|
||||
# L+1 CADR (ONE OF 5 STALL ADDRESSES. I.E., IMUSTALL, OPTSTALL, RADSTALL,
|
||||
# L+1 CADR (ONE OF 5 STALL ADDRESSES I.E. IMUSTALL,OPTSTALL,RADSTALL,
|
||||
# AOTSTALL,OR ATTSTALL)
|
||||
#
|
||||
# NORMAL-EXIT MODE --
|
||||
|
||||
# NORMAL-EXIT MODE-
|
||||
# TCF JOBSLEEP OR TCF MODEXIT
|
||||
#
|
||||
# ALARM OR ABORT EXIT MODE --
|
||||
|
||||
# ALARM OR ABORT EXIT MODE-
|
||||
# TC ABORT
|
||||
#
|
||||
# OUTPUT --
|
||||
|
||||
# OUTPUT-
|
||||
# MODECADR= CADR IF JOBSLEEP
|
||||
# MODECADR=+0 IF I/O COMPLETE
|
||||
# BUF2=L+3 IF I/O COMPLETE AND GOOD.
|
||||
# BUF2=L+2 IF I/O COMPLETE BUT FAILED.
|
||||
#
|
||||
# ERASABLE INITIALIZATION --
|
||||
|
||||
# ERASABLE INITIALIZATION-
|
||||
# BUF2 CONTAINS RETURN ADDRESS PLUS 1,(L+2)
|
||||
# BUF2+1 CONTAINS FBANK VALUE OF CALLING ROUTINE.
|
||||
# MODECADR OF CALLING ROUTINE CONTAINS +0,-1,-0 OR CADR RETURN ADDRESS.
|
||||
#
|
||||
# DEBRIS --
|
||||
# DEBRIS-
|
||||
# RUPTREG2 AND CALLING ROUTINE MODECADR.
|
||||
|
||||
AOTSTALL CAF ONE # AOT.
|
||||
@@ -855,7 +857,7 @@ GOMANUR CA ATTCADR # IS KALCMANU FREE
|
||||
|
||||
CA PRIORITY
|
||||
MASK PRIO37
|
||||
TS ATTPRIO # SAVE USER'S PRIO
|
||||
TS ATTPRIO # SAVE USERS PRIO
|
||||
|
||||
CAF KALEBCON # SET EBANK FOR KALCMAN3
|
||||
TS EBANK
|
||||
@@ -866,34 +868,33 @@ KALEBCON ECADR BCDU
|
||||
# Page 1443
|
||||
# PROGRAM DESCRIPTION
|
||||
# IMU STATUS CHECK ROUTINE R02 (SUBROUTINE UTILITY)
|
||||
# MOD NO -- 1
|
||||
# MOD BY -- N.BRODEUR
|
||||
#
|
||||
# MOD NO - 1
|
||||
# MOD BY - N.BRODEUR
|
||||
# FUNCTIONAL DESCRIPTION
|
||||
#
|
||||
# TO CHECK WHETHER IMU IS ON AND IF ON WHETHER IT IS ALIGNED TO AN
|
||||
# ORIENTATION KNOWN BY THE CMC. TO REQUEST SELECTION OF THE APPROPRIATE
|
||||
# PROGRAM IF THE IMU IS OFF OR NOT ALIGNED TO AN ORIENTATION KNOWN BY THE
|
||||
# CMC. CALLED THROUGH BANKCALL
|
||||
# CALLING SEQUENCE-
|
||||
#
|
||||
# CALLING SEQUENCE --
|
||||
# L TC BANKCALL
|
||||
# L+1 CADR R02BOTH
|
||||
#
|
||||
# SUBROUTINES CALLED
|
||||
#
|
||||
# VARALARM
|
||||
# FLAGUP
|
||||
#
|
||||
# NORMAL EXIT MODES
|
||||
# AT L+2 OF CALLING SEQUENCE
|
||||
#
|
||||
# AT L+2 OF CALLING SEQUENCE
|
||||
# ALARM OR ABORT EXIT MODES
|
||||
# GOTOP00H, WITH ALARM
|
||||
#
|
||||
# ERASABLE INITIALIZATION REQUIRED
|
||||
# NONE
|
||||
#
|
||||
# NONE
|
||||
# DEBRIS
|
||||
# CENTRALS -- A,Q,L
|
||||
#
|
||||
# CENTRALS-A,Q,L
|
||||
|
||||
BANK 34
|
||||
SETLOC R02
|
||||
@@ -923,25 +924,25 @@ R02ZERO TC UPFLAG
|
||||
OCT220 OCT 220
|
||||
|
||||
# Page 1445
|
||||
# PROGRAM DESCRIPTION: P06 10 FEB 67
|
||||
#
|
||||
# PROGRAM DESCRIPTION P06 10FEB67
|
||||
|
||||
# TRANSFER THE ISS/CMC FROM THE OPERATE TO THE STANDBY CONDITION.
|
||||
#
|
||||
|
||||
# THE NORMAL CONDITION OF READINESS OF THE GNCS WHEN NOT IN USE IS STANDBY. IN THIS CONDITION THE IMU
|
||||
# HEATER POWER IS ON. THE IMU OPERATE POWER IS OFF. THE COMPUTER POWER IS ON. THE OPTICS POWER IS OFF. THE
|
||||
# CMC STANDBY ON THE MAIN AND LEB DISKYS IS ON.
|
||||
#
|
||||
|
||||
# CALLING SEQUENCE:
|
||||
# ASTRONAUT REQUEST THROUGH DSKY V37E 06E.
|
||||
#
|
||||
|
||||
# SUBROUTINES CALLED:
|
||||
# GOPERF1
|
||||
# BANKCALL
|
||||
# FLAGDOWN
|
||||
#
|
||||
|
||||
# Page 1446
|
||||
# PRESTAND PREPARES FOR STANDBY BY SNAPSHOTTING THE SCALER AND TIME1 TIME2.
|
||||
# THE LOW 5 BITS OF THE SCALER ARE INSPECTED TO INSURE COMPATIBILITY
|
||||
# PRESTAND PREPARES FOR STANDBY BY SNAPSHOTTING THE SCALER AND TIME1 TIME2
|
||||
# THE LOW 5 BITS OF THE SCALER ARE INSPECTED TO INSURE COMPATABILITY
|
||||
# BETWEEN THE SCALER READING AND THE TIME1 TIME2 READING.
|
||||
|
||||
SETLOC P05P06
|
||||
@@ -992,7 +993,7 @@ OCT62 EQUALS .5SEC # DEC 50 = OCT 62
|
||||
# THE LOW 5 BITS OF THE SCALER READS 10000 FOR THE FIRST INTERVAL AFTER A
|
||||
# Page 1447.
|
||||
# T1 INCREMENT. IF SCALPREP DETECTS THIS INTERVAL THE T1,T2 AND SCALER
|
||||
# DATA ARE NOT COMPATIBLE AND RETURN IS TO L+1 FOR ANOTHER READING OF THE
|
||||
# DATA ARE NOT COMPATABLE AND RETURN IS TO L+1 FOR ANOTHER READING OF THE
|
||||
# DATA. OTHERWISE, THE RETURN IS TO L+2 TO PROCEED. ROUTINE ALSO PREPARES
|
||||
# THE SCALER READING FOR COMPUTATION OF THE INCREMENT TO UPDATE T1T2. (THE
|
||||
# 10 MS BIT (BIT 6) OF THE SCALER IS INCREMENTED 5 MS OUT OF PHASE FROM
|
||||
@@ -1022,14 +1023,14 @@ SCALPREP EXTEND
|
||||
|
||||
# POSTAND RECOVERS TIME AFTER STANDBY.THE SCALER IS SNAPSHOTTED AND THE
|
||||
# TIME1 TIME2 COUNTER IS SET TO ZERO. THE LOW 5 BITS OF THE SCALER ARE
|
||||
# INSPECTED TO INSURE COMPATIBILITY BETWEEN THE SCALER READING AND THE
|
||||
# INSPECTED TO INSURE COMPATABILITY BETWEEN THE SCALER READING AND THE
|
||||
# CLEARING OF THE TIME COUNTER. IT THEN COMPUTES THE DIFFERENCE IN SCALER
|
||||
# VALUES (IN DP) AND ADDS THIS TO THE PREVIOUSLY SNAPSHOTTED VALUES OF
|
||||
# TIME1 TIME2 AND PLACES THIS NEW TIME INTO THE TIME1 TIME2 COUNTER.
|
||||
|
||||
COUNT* $$/P05
|
||||
|
||||
POSTAND CS BIT11 # RECOVER TIME AFTER STANDBY
|
||||
POSTAND CS BIT11 # RECOVER TIME AFTER STANDBY.
|
||||
EXTEND
|
||||
WAND CHAN13 # CLEAR STANDBY ENABLE BIT
|
||||
INHINT
|
||||
@@ -1040,9 +1041,9 @@ POSTAND CS BIT11 # RECOVER TIME AFTER STANDBY
|
||||
TC POSTAND +3 # T1,T2,SCALER NOT COMPATIBLE
|
||||
EXTEND # T1,T2 AND SCALER OK
|
||||
DCS SCALSAVE
|
||||
DAS MPAC # FORM DP DIFFERENCE OF POST-STANDBY SCALER
|
||||
DAS MPAC # FORM DP DIFFERENCE OF POSTSTANDBY SCALER
|
||||
# Page 1448
|
||||
CAF BIT10 # MINUS PRE-STANDBY SCALER AND SHIFT RIGHT
|
||||
CAF BIT10 # MINUS PRESTANDBY SCALER AND SHIFT RIGHT
|
||||
TC SHORTMP # 5 TO ALIGN BITS WITH TIME1TIME2.
|
||||
CAF ZERO
|
||||
TS MPAC +2 # NEEDED FOR TP AGREE
|
||||
@@ -1063,6 +1064,3 @@ POSTCOM EXTEND # C(MPAC,+1) IS MAGNITUDE OF DELTA SCALER.
|
||||
ADRES NODOFLAG
|
||||
|
||||
TC GOTOP00H
|
||||
|
||||
|
||||
|
||||
|
||||
Reference in New Issue
Block a user