ryan/Apollo-11
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Adding typos back in to match the original

Browse Source
This commit is contained in:
Mike Wilson 2020-11-02 17:54:24 +00:00
parent cb4a709922
commit 96a86d477b
1 changed files with 4 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
Luminary099/IMU_MODE_SWITCHING_ROUTINES.agc
View File

@ -712,7 +712,7 @@ CAGETSTJ CS IMODES30 # IF DURING MODE SWITCH INITIALIZATION
# Page 1328 # Page 1328
# GENERALIZED MODE SWITCHING TERMINATION. ENTER AT GOODEND FOR SUCCESSFUL COMPLETION OF AN I/O OPERATION # GENERALIZED MODE SWITCHING TERMINATION. ENTER AT GOODEND FOR SUCCESSFUL COMPLETION OF AN I/O OPERATION
# OR AT BADEND FOR AN UNSUCCESSFUL ONE. C(A) OR ARRIVAL =0 FOR IMU, 1 FOR OPTICS. # OR AT BADEND FOR A N UNSUCCESSFUL ONE. C(A) OR ARRIVAL =0 FOR IMU, 1 FOR OPTICS.
BADEND TS RUPTREG2 # DEVICE INDEX. BADEND TS RUPTREG2 # DEVICE INDEX.
CS ZERO # FOR FAILURE. CS ZERO # FOR FAILURE.
@ -755,7 +755,7 @@ ENDMODE CA RUPTREG3 # -0 INDICATES OPERATION COMPLETE BUT
# #
# FUNCTIONAL DESCRIPTION- # FUNCTIONAL DESCRIPTION-
# TO DELAY FURTHER EXECUTION OF THE CALLING ROUTINE UNTIL ITS SELECTED # TO DELAY FURTHER EXECUTION OF THE CALLING ROUTINE UNTIL ITS SELECTED
# I/O FUNCTION IS COMPLETE. THE FOLLOWING CHECKS ON THE CALLING ROUTINE:S # I/O FUNCTION IS COMPLETE.THE FOLLOWING CHECKS ON THE CALLING ROUTINE:S
# MODECADR ARE MADE AND ACTED UPON. # MODECADR ARE MADE AND ACTED UPON.
# 1) +0 INDICATES INCOMPLETE I/O OPERATION. CALLING ROUTINE IS PUT TO # 1) +0 INDICATES INCOMPLETE I/O OPERATION. CALLING ROUTINE IS PUT TO
# SLEEP. # SLEEP.
@ -930,7 +930,7 @@ OCT220 OCT 220
# #
# THE NORMAL CONDITION OF READINESS OF THE GNCS WHEN NOT IN USE IS STANDBY. IN THIS CONDITION THE IMU # THE NORMAL CONDITION OF READINESS OF THE GNCS WHEN NOT IN USE IS STANDBY. IN THIS CONDITION THE IMU
# HEATER POWER IS ON. THE IMU OPERATE POWER IS OFF. THE COMPUTER POWER IS ON. THE OPTICS POWER IS OFF. THE # HEATER POWER IS ON. THE IMU OPERATE POWER IS OFF. THE COMPUTER POWER IS ON. THE OPTICS POWER IS OFF. THE
# CMC STANDBY ON THE MAIN AND LEB DISKYS IS ON. # CMC STANDBY ON THE MAIN AND LEB DISKYS IS ON.
# #
# CALLING SEQUENCE: # CALLING SEQUENCE:
# ASTRONAUT REQUEST THROUGH DSKY V37E 06E. # ASTRONAUT REQUEST THROUGH DSKY V37E 06E.
@ -1021,7 +1021,7 @@ SCALPREP EXTEND
INCR MPAC +2 # NO INCR MPAC +2 # NO
TC MPAC +2 # YES TC MPAC +2 # YES
# POSTAND RECOVERS TIME AFTER STANDBY. THE SCALER IS SNAPSHOTTED AND THE # POSTAND RECOVERS TIME AFTER STANDBY.THE SCALER IS SNAPSHOTTED AND THE
# TIME1 TIME2 COUNTER IS SET TO ZERO. THE LOW 5 BITS OF THE SCALER ARE # TIME1 TIME2 COUNTER IS SET TO ZERO. THE LOW 5 BITS OF THE SCALER ARE
# INSPECTED TO INSURE COMPATIBILITY BETWEEN THE SCALER READING AND THE # INSPECTED TO INSURE COMPATIBILITY BETWEEN THE SCALER READING AND THE
# CLEARING OF THE TIME COUNTER. IT THEN COMPUTES THE DIFFERENCE IN SCALER # CLEARING OF THE TIME COUNTER. IT THEN COMPUTES THE DIFFERENCE IN SCALER