diff --git a/Luminary099/PHASE_TABLE_MAINTENANCE.agc b/Luminary099/PHASE_TABLE_MAINTENANCE.agc
index f878952..3b0460a 100644
--- a/Luminary099/PHASE_TABLE_MAINTENANCE.agc
+++ b/Luminary099/PHASE_TABLE_MAINTENANCE.agc
@@ -82,24 +82,30 @@ DSPMMJOB	EQUALS	DSPMMJB
 
 # Page 1295
 # PHASCHNG IS THE MAIN WAY OF MAKING PHASE CHANGES FOR RESTARTS.  THERE ARE THREE FORMS OF PHASCHNG, KNOWN AS TYPE
-# A, TYPE B, AND TYPE C.  THEY ARE ALL CALLED AS FOLLOWS, WHERE OCT XXXXX CONTAINS THE PHASE INFORMATION,
+# A, TYPE B, AND TYPE C. THEY ARE ALL CALLED AS FOLLOWS, WHERE OCT XXXXX CONTAINS THE PHASE INFORMATION,
+#
 #		TC	PHASCHNG
 #		OCT	XXXXX
-# TYPE A IS CONCERNED WITH FIXED PHASE CHANGES, THAT IS, PHASE INFORMATION THAT IS STORED PERMANENTLY.  THESE
+#
+# TYPE A IS CONCERNED WITH FIXED PHASE CHANGES, THAT IS, PHASE INFORMATIONTHAT IS STORED PERMANENTLY.  THESE
 # OPTIONS ARE, WHERE G STANDS FOR A GROUP AND .X FOR THE PHASE,
-#	G.0		INACTIVE, WILL NOT PERMIT A GROUP G RESTART
+#
+#	G.0		INACTIVE, WILLNOT PERMIT A GROUP G RESTART
 #	G.1		WILL CAUSE THE LAST DISPLAY TO BE REACTIVATED, USED MAINLY IN MANNED FLIGHTS
 #	G.EVEN		A DOUBLE TABLE RESTART, CAN CAUSE ANY COMBINATION OF TWO JOBS, TASKS, AND/OR
 #			LONGCALL TO BE RESTARTED.
-#	G.ODD NOT .1	A SINGLE TABLE RESTART, CAN CAUSE EITHER A JOB, TASK, OR LONGCALL RESTART.
+#	G.ODD NOT .1	A SINGLE TABLE RESTART, CAN CAUSE EITHER A JOB, TASK, OR LONGCALL RESTART
 #
 # THIS INFORMATION IS PUT INTO THE OCTAL WORD AFTER TC PHASCHNG AS FOLLOWS
-#	TL0 00P PPP PPP GGG
-# WHERE EACH LETTER OR NUMBER STANTS FOR A BIT.  THE G'S STAND FOR THE GROUP, OCTAL 1-7, THE P'S FOR THE PHASE,
-# OCTAL 0 - 127.  0'S MUST BE 0.  IF ONE WISHES TO HAVE THE TBASE OF GROUP G TO BE SET AT THIS TIME,
-# T IS SET TO 1, OTHERWISE IT IS SET TO 0.  SIMILARLY IF ONE WISHES TO SET LONGBASE, THEN L IS SET TO 1, OTHERWISE
+#
+#	TL0 00P PPP PPP GGG		,
+#
+# WHERE EACH LETTER OR NUMBER STANTS FOR A BIT.  THE G:S STAND FOR THE GROUP, OCTAL 1 - 7, THE P:S FOR THE PHASE,
+# OCTAL 0 - 127.  0:S MUST BE 0.  IF ONE WISHES TO HAVE THE TBASE OF GROUP G TO BE SET AT THIS TIME,
+# T IS SET TO 1, OTHERWISE IT IS SET TO 0.  SIMIARLY IF ONE WISHES TO SET LONGBASE, THEN L IS SET TO 1, OTHERWISE
 # IT IS SET TO 0.  SOME EXAMPLES,
-#		TC	PHASCHNG	# THIS WILL CAUSE GROUP 3 TO BE SET TO 0,
+#
+#		TC	PHASCHNG	# THIS WILL CAUSE GROUP 3 TOBE SET TO 0,
 #		OCT	00003		# MAKING GROUP 3 INACTIVE
 #
 #		TC	PHASCHNG	# IF A RESTART OCCURS THIS WOULD CAUSE
@@ -108,23 +114,23 @@ DSPMMJOB	EQUALS	DSPMMJB
 #		TC	PHASCHNG	# THIS SETS THE TBASE OF GROUP 4 AND IN
 #		OCT	40064		# CASE OF A RESTART WOULD START UP THE TWO
 #					# THINGS LOCATED IN THE DOUBLE 4.6 RESTART
-#					# LOCATION.
-#
+#					# LOCATION
 #		TC	PHASCHNG	# THIS SETS LONGBASE AND UPON A RESTART
 #		OCT	20135		# CAUSES 5.13 TO BE RESTARTED (SINCE
 #					# LONGBASE WAS SET THIS SINGLE ENTRY
 #					# SHOULD BE A LONGCALL)
-#
 #		TC	PHASCHNG	# SINCE BOTH TBASE4 AND LONGBASE ARE SET,
 #		OCT	60124		# 4.12 SHOULD CONTAIN BOTH A TASK AND A
 #					# LONGCALL TO BE RESTARTED
 #
-# TYPE C PHASCHNG CONTAINS THE VARIABLE TYPE OF PHASCHNG INFORMATION.  INSTEAD OF THE INFORMATION BEING IN A
-# PERMANENT FORM, ONE STORES THE DESIRED RESTART INFORMATION IN A VARIABLE LOCATION.  THE BITS ARE AS FOLLOWS,
+# TYPE C PHASCHNG CONTAINS THE VARIABLE TYPE OF PHASCHNG INFORMATION. INSTEAD OF THE INFORMATION BEING IN A
+# PERMANENT FORM, ONE STORES THE DESIRED RESTART INFORMATION IN A VARIABKE LOCATION. THE BITS ARE AS FOLLOWS,
+#
 #	TL0 1AD XXX CJW GGG
-# WHERE EACH LETTER OR NUMBER STANDS FOR A BIT.  THE G'S STAND FOR THE GROUP, OCTAL 1 - 7.  IF THE RESTART IS TO
+#
+# WHERE EACH LETTER OR NUMBER STANDS FOR A BIT.  THE G:S STAND FOR THE GROUP, OCTAL 1 - 7.  IF THE RESTART IS TO
 # BE BY WAITLIST, W IS SET TO 1, IF IT IS A JOB, J IS SET TO 1, IF IT IS A LONGCALL, C IS SET TO 1.  ONLY ONE OF
-# THESE THREE BITS MAY BE SET.  X'S ARE IGNORED, 1 MUST BE 1, AND 0 MUST BE 0.  AGAIN T STANDS FOR THE TBASE,
+# THESE THREE BIT S MAY BE SET.  X:S ARE IGNORED  1 MUST BE 1, AND 0 MUST  BE 0.  AGAIN T STANDS FOR THE TBASE,
 # Page 1296
 # AND L FOR LONGBASE.  THE BITS A AND D ARE CONCERNED WITH THE VARIABLE INFORMATION.  IF D IS SET TO 1, A PRIORITY
 # OR DELTA TIME WILL BE READ FROM THE NEXT LOCATION AFTER THE OCTAL INFORMATION., IF THIS IS TO BE INDIRECT, THAT