initial commit of SVN release repo

conf/httpd-ssl.conf

@@ -0,0 +1,251 @@
+#
+# This is the Apache server configuration file providing SSL support.
+# It contains the configuration directives to instruct the server how to
+# serve pages over an https connection. For detailed information about these 
+# directives see <URL:http://httpd.apache.org/docs/2.4/mod/mod_ssl.html>
+# 
+# Do NOT simply read the instructions in here without understanding
+# what they do.  They're here only as hints or reminders.  If you are unsure
+# consult the online docs. You have been warned.  
+#
+# Required modules: mod_log_config, mod_setenvif, mod_ssl,
+#          socache_shmcb_module (for default value of SSLSessionCache)
+
+#
+# Pseudo Random Number Generator (PRNG):
+# Configure one or more sources to seed the PRNG of the SSL library.
+# The seed data should be of good random quality.
+# WARNING! On some platforms /dev/random blocks if not enough entropy
+# is available. This means you then cannot use the /dev/random device
+# because it would lead to very long connection times (as long as
+# it requires to make more entropy available). But usually those
+# platforms additionally provide a /dev/urandom device which doesn't
+# block. So, if available, use this one instead. Read the mod_ssl User
+# Manual for more details.
+#
+#SSLRandomSeed startup file:/dev/random  512
+#SSLRandomSeed startup file:/dev/urandom 512
+#SSLRandomSeed connect file:/dev/random  512
+#SSLRandomSeed connect file:/dev/urandom 512
+
+
+#
+# When we also provide SSL we have to listen to the 
+# standard HTTP port (see above) and to the HTTPS port
+#
+# Note: Configurations that use IPv6 but not IPv4-mapped addresses need two
+#       Listen directives: "Listen [::]:443" and "Listen 0.0.0.0:443"
+#
+#Listen localhost:443
+
+##
+##  SSL Global Context
+##
+##  All SSL configuration in this context applies both to
+##  the main server and all SSL-enabled virtual hosts.
+##
+
+#   SSL Cipher Suite:
+#   List the ciphers that the client is permitted to negotiate.
+#   See the mod_ssl documentation for a complete list.
+SSLCipherSuite HIGH:MEDIUM:!aNULL:!MD5
+
+#   Speed-optimized SSL Cipher configuration:
+#   If speed is your main concern (on busy HTTPS servers e.g.),
+#   you might want to force clients to specific, performance
+#   optimized ciphers. In this case, prepend those ciphers
+#   to the SSLCipherSuite list, and enable SSLHonorCipherOrder.
+#   Caveat: by giving precedence to RC4-SHA and AES128-SHA
+#   (as in the example below), most connections will no longer
+#   have perfect forward secrecy - if the server's key is
+#   compromised, captures of past or future traffic must be
+#   considered compromised, too.
+#SSLCipherSuite RC4-SHA:AES128-SHA:HIGH:MEDIUM:!aNULL:!MD5
+#SSLHonorCipherOrder on 
+
+#   Pass Phrase Dialog:
+#   Configure the pass phrase gathering process.
+#   The filtering dialog program (`builtin' is an internal
+#   terminal dialog) has to provide the pass phrase on stdout.
+SSLPassPhraseDialog  builtin
+
+#   Inter-Process Session Cache:
+#   Configure the SSL Session Cache: First the mechanism 
+#   to use and second the expiring timeout (in seconds).
+#SSLSessionCache "shmcb:C:/xampp/apache/logs/ssl_scache(512000)"
+SSLSessionCache "shmcb:C:/xampp/apache/logs/ssl_scache(512000)"
+SSLSessionCacheTimeout  300
+
+##
+## SSL Virtual Host Context
+##
+
+<VirtualHost _default_:443>
+
+#   General setup for the virtual host
+DocumentRoot "C:/xampp/htdocs"
+ServerName www.example.com:443
+ServerAdmin admin@example.com
+ErrorLog "C:/xampp/apache/logs/error.log"
+TransferLog "C:/xampp/apache/logs/access.log"
+
+#   SSL Engine Switch:
+#   Enable/Disable SSL for this virtual host.
+SSLEngine on
+
+#   Server Certificate:
+#   Point SSLCertificateFile "conf/ssl.crt/server.crt"
+#   the certificate is encrypted, then you will be prompted for a
+#   pass phrase.  Note that a kill -HUP will prompt again.  Keep
+#   in mind that if you have both an RSA and a DSA certificate you
+#   can configure both in parallel (to also allow the use of DSA
+#   ciphers, etc.)
+#   Some ECC cipher suites (http://www.ietf.org/rfc/rfc4492.txt)
+#   require an ECC certificate which can also be configured in
+#   parallel.
+SSLCertificateFile "conf/ssl.crt/server.crt"
+#SSLCertificateFile "conf/ssl.crt/server.crt"
+#SSLCertificateFile "conf/ssl.crt/server.crt"
+
+#   Server Private Key:
+#   If the key is not combined with the certificate, use this
+#   directive to point at the key file.  Keep in mind that if
+#   you've both a RSA and a DSA private key you can configure
+#   both in parallel (to also allow the use of DSA ciphers, etc.)
+#   ECC keys, when in use, can also be configured in parallel
+SSLCertificateKeyFile "conf/ssl.key/server.key"
+#SSLCertificateKeyFile "conf/ssl.key/server.key"
+#SSLCertificateKeyFile "conf/ssl.key/server.key"
+
+#   Server Certificate Chain:
+#   Point SSLCertificateChainFile at a file containing the
+#   concatenation of PEM encoded CA certificates which form the
+#   certificate chain for the server certificate. Alternatively
+#   the referenced file can be the same as SSLCertificateFile "conf/ssl.crt/server.crt"
+#   certificate for convenience.
+#SSLCertificateChainFile "c:/Apache24/conf/server-ca.crt"
+
+#   Certificate Authority (CA):
+#   Set the CA certificate verification path where to find CA
+#   certificates for client authentication or alternatively one
+#   huge file containing all of them (file must be PEM encoded)
+#   Note: Inside SSLCACertificatePath you need hash symlinks
+#         to point to the certificate files. Use the provided
+#         Makefile to update the hash symlinks after changes.
+#SSLCACertificatePath "c:/Apache24/conf/ssl.crt"
+#SSLCACertificateFile "c:/Apache24/conf/ssl.crt/ca-bundle.crt"
+
+#   Certificate Revocation Lists (CRL):
+#   Set the CA revocation path where to find CA CRLs for client
+#   authentication or alternatively one huge file containing all
+#   of them (file must be PEM encoded).
+#   The CRL checking mode needs to be configured explicitly
+#   through SSLCARevocationCheck (defaults to "none" otherwise).
+#   Note: Inside SSLCARevocationPath you need hash symlinks
+#         to point to the certificate files. Use the provided
+#         Makefile to update the hash symlinks after changes.
+#SSLCARevocationPath "c:/Apache24/conf/ssl.crl"
+#SSLCARevocationFile "c:/Apache24/conf/ssl.crl/ca-bundle.crl"
+#SSLCARevocationCheck chain
+
+#   Client Authentication (Type):
+#   Client certificate verification type and depth.  Types are
+#   none, optional, require and optional_no_ca.  Depth is a
+#   number which specifies how deeply to verify the certificate
+#   issuer chain before deciding the certificate is not valid.
+#SSLVerifyClient require
+#SSLVerifyDepth  10
+
+#   TLS-SRP mutual authentication:
+#   Enable TLS-SRP and set the path to the OpenSSL SRP verifier
+#   file (containing login information for SRP user accounts). 
+#   Requires OpenSSL 1.0.1 or newer. See the mod_ssl FAQ for
+#   detailed instructions on creating this file. Example:
+#   "openssl srp -srpvfile c:/Apache24/conf/passwd.srpv -add username"
+#SSLSRPVerifierFile "c:/Apache24/conf/passwd.srpv"
+
+#   Access Control:
+#   With SSLRequire you can do per-directory access control based
+#   on arbitrary complex boolean expressions containing server
+#   variable checks and other lookup directives.  The syntax is a
+#   mixture between C and Perl.  See the mod_ssl documentation
+#   for more details.
+#<Location />
+#SSLRequire (    %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
+#            and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
+#            and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
+#            and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
+#            and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20       ) \
+#           or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
+#</Location>
+
+#   SSL Engine Options:
+#   Set various options for the SSL engine.
+#   o FakeBasicAuth:
+#     Translate the client X.509 into a Basic Authorisation.  This means that
+#     the standard Auth/DBMAuth methods can be used for access control.  The
+#     user name is the `one line' version of the client's X.509 certificate.
+#     Note that no password is obtained from the user. Every entry in the user
+#     file needs this password: `xxj31ZMTZzkVA'.
+#   o ExportCertData:
+#     This exports two additional environment variables: SSL_CLIENT_CERT and
+#     SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
+#     server (always existing) and the client (only existing when client
+#     authentication is used). This can be used to import the certificates
+#     into CGI scripts.
+#   o StdEnvVars:
+#     This exports the standard SSL/TLS related `SSL_*' environment variables.
+#     Per default this exportation is switched off for performance reasons,
+#     because the extraction step is an expensive operation and is usually
+#     useless for serving static content. So one usually enables the
+#     exportation for CGI and SSI requests only.
+#   o StrictRequire:
+#     This denies access when "SSLRequireSSL" or "SSLRequire" applied even
+#     under a "Satisfy any" situation, i.e. when it applies access is denied
+#     and no other module can change it.
+#   o OptRenegotiate:
+#     This enables optimized SSL connection renegotiation handling when SSL
+#     directives are used in per-directory context. 
+#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
+<FilesMatch "\.(cgi|shtml|phtml|php)$">
+    SSLOptions +StdEnvVars
+</FilesMatch>
+<Directory "C:/xampp/apache/cgi-bin">
+    SSLOptions +StdEnvVars
+</Directory>
+
+#   SSL Protocol Adjustments:
+#   The safe and default but still SSL/TLS standard compliant shutdown
+#   approach is that mod_ssl sends the close notify alert but doesn't wait for
+#   the close notify alert from client. When you need a different shutdown
+#   approach you can use one of the following variables:
+#   o ssl-unclean-shutdown:
+#     This forces an unclean shutdown when the connection is closed, i.e. no
+#     SSL close notify alert is sent or allowed to be received.  This violates
+#     the SSL/TLS standard but is needed for some brain-dead browsers. Use
+#     this when you receive I/O errors because of the standard approach where
+#     mod_ssl sends the close notify alert.
+#   o ssl-accurate-shutdown:
+#     This forces an accurate shutdown when the connection is closed, i.e. a
+#     SSL close notify alert is send and mod_ssl waits for the close notify
+#     alert of the client. This is 100% SSL/TLS standard compliant, but in
+#     practice often causes hanging connections with brain-dead browsers. Use
+#     this only for browsers where you know that their SSL implementation
+#     works correctly. 
+#   Notice: Most problems of broken clients are also related to the HTTP
+#   keep-alive facility, so you usually additionally want to disable
+#   keep-alive for those clients, too. Use variable "nokeepalive" for this.
+#   Similarly, one has to force some clients to use HTTP/1.0 to workaround
+#   their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
+#   "force-response-1.0" for this.
+BrowserMatch "MSIE [2-5]" \
+         nokeepalive ssl-unclean-shutdown \
+         downgrade-1.0 force-response-1.0
+
+#   Per-Server Logging:
+#   The home of a custom SSL log file. Use this when you want a
+#   compact non-error SSL logfile on a virtual host basis.
+CustomLog "C:/xampp/apache/logs/ssl_request.log" \
+          "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
+
+</VirtualHost>                                  

conf/httpd-xampp.conf

@@ -0,0 +1,126 @@
+#
+# XAMPP settings
+#
+
+<IfModule env_module>
+    SetEnv MIBDIRS "C:/xampp/php/extras/mibs"
+    SetEnv MYSQL_HOME "\\xampp\\mysql\\bin"
+    SetEnv OPENSSL_CONF "C:/xampp/apache/bin/openssl.cnf"
+    SetEnv PHP_PEAR_SYSCONF_DIR "\\xampp\\php"
+    SetEnv PHPRC "\\xampp\\php"
+    SetEnv TMP "\\xampp\\tmp"
+</IfModule>
+
+#
+# PHP-Module setup
+#
+PHPIniDir "C:/xampp/php"
+LoadFile "C:/xampp/php/php7ts.dll"
+LoadFile "C:/xampp/php/libpq.dll"
+LoadModule php7_module "C:/xampp/php/php7apache2_4.dll"
+
+<FilesMatch "\.php$">
+    SetHandler application/x-httpd-php
+</FilesMatch>
+<FilesMatch "\.phps$">
+    SetHandler application/x-httpd-php-source
+</FilesMatch>
+
+#
+# PHP-CGI setup
+#
+#<FilesMatch "\.php$">
+#    SetHandler application/x-httpd-php-cgi
+#</FilesMatch>
+#<IfModule actions_module>
+#    Action application/x-httpd-php-cgi "/php-cgi/php-cgi.exe"
+#</IfModule>
+
+
+<IfModule php7_module="">
+    PHPINIDir "C:/xampp/php"
+</IfModule>
+
+<IfModule mime_module>
+    AddType text/html .php .phps
+</IfModule>
+
+ScriptAlias /php-cgi/ "C:/xampp/php/"
+<Directory "C:/xampp/php">
+    AllowOverride None
+    Options None
+    Require all denied
+    <Files "php-cgi.exe">
+          Require all granted
+    </Files>
+</Directory>
+
+<Directory "C:/xampp/cgi-bin">
+    <FilesMatch "\.php$">
+        SetHandler cgi-script
+    </FilesMatch>
+    <FilesMatch "\.phps$">
+        SetHandler None
+    </FilesMatch>
+</Directory>
+
+<Directory "C:/xampp/htdocs/xampp">
+    <IfModule php7_module="">
+    	<Files "status.php">
+    		php_admin_flag safe_mode off
+    	</Files>
+    </IfModule>
+    AllowOverride AuthConfig
+</Directory>
+
+<IfModule alias_module>
+    Alias /security "C:/xampp/security/htdocs/"
+    <Directory "C:/xampp/security/htdocs">
+        <IfModule php7_module="">
+    		<Files "xamppsecurity.php">
+    			php_admin_flag safe_mode off
+    		</Files>
+        </IfModule>
+        AllowOverride AuthConfig
+        Require all granted
+   </Directory>
+
+    Alias /licenses "C:/xampp/licenses/"
+    <Directory "C:/xampp/licenses">
+        Options +Indexes
+        <IfModule autoindex_color_module>
+            DirectoryIndexTextColor  "#000000"
+            DirectoryIndexBGColor "#f8e8a0"
+            DirectoryIndexLinkColor "#bb3902"
+            DirectoryIndexVLinkColor "#bb3902"
+            DirectoryIndexALinkColor "#bb3902"
+        </IfModule>
+        Require all granted
+   </Directory>
+
+    Alias /phpmyadmin "C:/xampp/phpMyAdmin/"
+    <Directory "C:/xampp/phpMyAdmin">
+        AllowOverride AuthConfig
+        Require all granted
+    </Directory>
+
+    Alias /webalizer "C:/xampp/webalizer/"
+    <Directory "C:/xampp/webalizer">
+        <IfModule php7_module="">
+    		<Files "webalizer.php">
+    			php_admin_flag safe_mode off
+    		</Files>
+        </IfModule>
+        AllowOverride AuthConfig
+        Require all granted
+    </Directory>
+</IfModule>
+
+#
+# New XAMPP security concept
+#
+#<LocationMatch "^/(?i:(?:xampp|security|licenses|phpmyadmin|webalizer|server-status|server-info))">
+#        Require local
+#	ErrorDocument 403 /error/XAMPP_FORBIDDEN.html.var
+#</LocationMatch>
+

conf/httpd.conf

@@ -0,0 +1,582 @@
+#
+# This is the main Apache HTTP server configuration file.  It contains the
+# configuration directives that give the server its instructions.
+# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
+# In particular, see 
+# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
+# for a discussion of each configuration directive.
+#
+# Do NOT simply read the instructions in here without understanding
+# what they do.  They're here only as hints or reminders.  If you are unsure
+# consult the online docs. You have been warned.  
+#
+# Configuration and logfile names: If the filenames you specify for many
+# of the server's control files begin with "/" (or "drive:/" for Win32), the
+# server will use that explicit path.  If the filenames do *not* begin
+# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
+# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
+# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log" 
+# will be interpreted as '/logs/access_log'.
+#
+# NOTE: Where filenames are specified, you must use forward slashes
+# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
+# If a drive letter is omitted, the drive on which httpd.exe is located
+# will be used by default.  It is recommended that you always supply
+# an explicit drive letter in absolute paths to avoid confusion.
+
+#
+# ServerRoot: The top of the directory tree under which the server's
+# configuration, error, and log files are kept.
+#
+# Do not add a slash at the end of the directory path.  If you point
+# ServerRoot at a non-local disk, be sure to specify a local disk on the
+# Mutex directive, if file-based mutexes are used.  If you wish to share the
+# same ServerRoot for multiple httpd daemons, you will need to change at
+# least PidFile.
+#
+ServerRoot "C:/xampp/apache"
+
+#
+# Mutex: Allows you to set the mutex mechanism and mutex file directory
+# for individual mutexes, or change the global defaults
+#
+# Uncomment and change the directory if mutexes are file-based and the default
+# mutex file directory is not on a local disk or is not appropriate for some
+# other reason.
+#
+# Mutex default:logs
+
+#
+# Listen: Allows you to bind Apache to specific IP addresses and/or
+# ports, instead of the default. See also the <VirtualHost>
+# directive.
+#
+# Change this to Listen on specific IP addresses as shown below to 
+# prevent Apache from glomming onto all bound IP addresses.
+#
+#Listen 12.34.56.78:80
+Listen 127.0.0.1:80
+
+#
+# Dynamic Shared Object (DSO) Support
+#
+# To be able to use the functionality of a module which was built as a DSO you
+# have to place corresponding `LoadModule' lines at this location so the
+# directives contained in it are actually available _before_ they are used.
+# Statically compiled modules (those listed by `httpd -l') do not need
+# to be loaded here.
+#
+# Example:
+# LoadModule foo_module modules/mod_foo.so
+#
+LoadModule access_compat_module modules/mod_access_compat.so
+#LoadModule actions_module modules/mod_actions.so
+LoadModule alias_module modules/mod_alias.so
+#LoadModule allowmethods_module modules/mod_allowmethods.so
+#LoadModule asis_module modules/mod_asis.so
+#LoadModule auth_basic_module modules/mod_auth_basic.so
+#LoadModule auth_digest_module modules/mod_auth_digest.so
+#LoadModule authn_anon_module modules/mod_authn_anon.so
+#LoadModule authn_core_module modules/mod_authn_core.so
+#LoadModule authn_dbd_module modules/mod_authn_dbd.so
+#LoadModule authn_dbm_module modules/mod_authn_dbm.so
+#LoadModule authn_file_module modules/mod_authn_file.so
+#LoadModule authn_socache_module modules/mod_authn_socache.so
+#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
+LoadModule authz_core_module modules/mod_authz_core.so
+#LoadModule authz_dbd_module modules/mod_authz_dbd.so
+#LoadModule authz_dbm_module modules/mod_authz_dbm.so
+#LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
+#LoadModule authz_host_module modules/mod_authz_host.so
+#LoadModule authz_owner_module modules/mod_authz_owner.so
+#LoadModule authz_user_module modules/mod_authz_user.so
+#LoadModule autoindex_module modules/mod_autoindex.so
+#LoadModule buffer_module modules/mod_buffer.so
+#LoadModule cache_module modules/mod_cache.so
+#LoadModule cache_disk_module modules/mod_cache_disk.so
+#LoadModule cern_meta_module modules/mod_cern_meta.so
+LoadModule cgi_module modules/mod_cgi.so
+#LoadModule charset_lite_module modules/mod_charset_lite.so
+#LoadModule data_module modules/mod_data.so
+#LoadModule dav_module modules/mod_dav.so
+#LoadModule dav_fs_module modules/mod_dav_fs.so
+#LoadModule dav_lock_module modules/mod_dav_lock.so
+#LoadModule dbd_module modules/mod_dbd.so
+#LoadModule deflate_module modules/mod_deflate.so
+LoadModule dir_module modules/mod_dir.so
+#LoadModule dumpio_module modules/mod_dumpio.so
+#LoadModule env_module modules/mod_env.so
+#LoadModule expires_module modules/mod_expires.so
+#LoadModule ext_filter_module modules/mod_ext_filter.so
+#LoadModule file_cache_module modules/mod_file_cache.so
+#LoadModule filter_module modules/mod_filter.so
+#LoadModule headers_module modules/mod_headers.so
+#LoadModule heartbeat_module modules/mod_heartbeat.so
+#LoadModule heartmonitor_module modules/mod_heartmonitor.so
+#LoadModule ident_module modules/mod_ident.so
+#LoadModule imagemap_module modules/mod_imagemap.so
+#LoadModule include_module modules/mod_include.so
+#LoadModule info_module modules/mod_info.so
+#LoadModule isapi_module modules/mod_isapi.so
+#LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
+#LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
+#LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
+#LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
+#LoadModule ldap_module modules/mod_ldap.so
+#LoadModule logio_module modules/mod_logio.so
+LoadModule log_config_module modules/mod_log_config.so
+#LoadModule log_debug_module modules/mod_log_debug.so
+#LoadModule log_forensic_module modules/mod_log_forensic.so
+#LoadModule lua_module modules/mod_lua.so
+#LoadModule cache_disk_module modules/mod_cache_disk.so
+LoadModule mime_module modules/mod_mime.so
+#LoadModule mime_magic_module modules/mod_mime_magic.so
+#LoadModule negotiation_module modules/mod_negotiation.so
+#LoadModule proxy_module modules/mod_proxy.so
+#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
+#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
+#LoadModule proxy_connect_module modules/mod_proxy_connect.so
+#LoadModule proxy_express_module modules/mod_proxy_express.so
+#LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
+#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
+#LoadModule proxy_html_module modules/mod_proxy_html.so
+#LoadModule proxy_http_module modules/mod_proxy_http.so
+#LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
+#LoadModule ratelimit_module modules/mod_ratelimit.so
+#LoadModule reflector_module modules/mod_reflector.so
+#LoadModule remoteip_module modules/mod_remoteip.so
+#LoadModule request_module modules/mod_request.so
+#LoadModule reqtimeout_module modules/mod_reqtimeout.so
+#LoadModule rewrite_module modules/mod_rewrite.so
+#LoadModule sed_module modules/mod_sed.so
+#LoadModule session_module modules/mod_session.so
+#LoadModule session_cookie_module modules/mod_session_cookie.so
+#LoadModule session_crypto_module modules/mod_session_crypto.so
+#LoadModule session_dbd_module modules/mod_session_dbd.so
+LoadModule setenvif_module modules/mod_setenvif.so
+#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
+#LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
+#LoadModule socache_dbm_module modules/mod_socache_dbm.so
+#LoadModule socache_memcache_module modules/mod_socache_memcache.so
+#LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
+#LoadModule speling_module modules/mod_speling.so
+#LoadModule ssl_module modules/mod_ssl.so
+#LoadModule status_module modules/mod_status.so
+#LoadModule substitute_module modules/mod_substitute.so
+#LoadModule unique_id_module modules/mod_unique_id.so
+#LoadModule userdir_module modules/mod_userdir.so
+#LoadModule usertrack_module modules/mod_usertrack.so
+#LoadModule version_module modules/mod_version.so
+#LoadModule vhost_alias_module modules/mod_vhost_alias.so
+#LoadModule watchdog_module modules/mod_watchdog.so
+#LoadModule xml2enc_module modules/mod_xml2enc.so
+
+<IfModule unixd_module>
+#
+# If you wish httpd to run as a different user or group, you must run
+# httpd as root initially and it will switch.  
+#
+# User/Group: The name (or #number) of the user/group to run httpd as.
+# It is usually good practice to create a dedicated user and group for
+# running httpd, as with most system services.
+#
+User daemon
+Group daemon
+
+</IfModule>
+
+# 'Main' server configuration
+#
+# The directives in this section set up the values used by the 'main'
+# server, which responds to any requests that aren't handled by a
+# <VirtualHost> definition.  These values also provide defaults for
+# any <VirtualHost> containers you may define later in the file.
+#
+# All of these directives may appear inside <VirtualHost> containers,
+# in which case these default settings will be overridden for the
+# virtual host being defined.
+#
+
+#
+# ServerAdmin: Your address, where problems with the server should be
+# e-mailed.  This address appears on some server-generated pages, such
+# as error documents.  e.g. admin@your-domain.com
+#
+ServerAdmin postmaster@localhost
+
+#
+# ServerName gives the name and port that the server uses to identify itself.
+# This can often be determined automatically, but we recommend you specify
+# it explicitly to prevent problems during startup.
+#
+# If your host doesn't have a registered DNS name, enter its IP address here.
+#
+ServerName localhost:80
+
+#
+# Deny access to the entirety of your server's filesystem. You must
+# explicitly permit access to web content directories in other 
+# <Directory> blocks below.
+#
+<Directory />
+	Order deny,allow
+	#Deny from all
+	Options none
+    AllowOverride none
+    Require all denied
+</Directory>
+
+#
+# Turn Trace Off
+#
+TraceEnable off
+
+#
+# Request Limits
+#
+LimitRequestFields 32767
+LimitRequestFieldSize 8190
+LimitRequestLine 8190
+
+#
+# Set ServerToken
+#
+ServerTokens Prod
+
+#
+# set timeout
+#
+TimeOut 300
+
+#
+# Note that from this point forward you must specifically allow
+# particular features to be enabled - so if something's not working as
+# you might expect, make sure that you have specifically enabled it
+# below.
+#
+
+#
+# DocumentRoot: The directory out of which you will serve your
+# documents. By default, all requests are taken from this directory, but
+# symbolic links and aliases may be used to point to other locations.
+#
+DocumentRoot "C:/xampp/www"
+<Directory "C:/xampp/www">
+    #
+    # Possible values for the Options directive are "None", "All",
+    # or any combination of:
+    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
+    #
+    # Note that "MultiViews" must be named *explicitly* --- "Options All"
+    # doesn't give it to you.
+    #
+    # The Options directive is both complicated and important.  Please see
+    # http://httpd.apache.org/docs/2.4/mod/core.html#options
+    # for more information.
+    #
+    Options None
+
+    #
+    # AllowOverride controls what directives may be placed in .htaccess files.
+    # It can be "All", "None", or any combination of the keywords:
+    #   AllowOverride FileInfo AuthConfig Limit
+    #
+    AllowOverride None
+
+    #
+    # Controls who can get stuff from this server.
+    #
+    Require all granted
+	
+	#
+	# Limit request body
+	#
+	LimitRequestBody 250000000
+</Directory>
+
+#
+# DirectoryIndex: sets the file that Apache will serve if a directory
+# is requested.
+#
+<IfModule dir_module>
+    DirectoryIndex index.php index.html
+</IfModule>
+
+#
+# The following lines prevent .htaccess and .htpasswd files from being 
+# viewed by Web clients. 
+#
+<Files ".ht*">
+    Require all denied
+</Files>
+
+#
+# ErrorLog: The location of the error log file.
+# If you do not specify an ErrorLog directive within a <VirtualHost>
+# container, error messages relating to that virtual host will be
+# logged here.  If you *do* define an error logfile for a <VirtualHost>
+# container, that host's errors will be logged there and not here.
+#
+ErrorLog "logs/error.log"
+
+#
+# LogLevel: Control the number of messages logged to the error_log.
+# Possible values include: debug, info, notice, warn, error, crit,
+# alert, emerg.
+#
+LogLevel warn
+
+<IfModule log_config_module>
+    #
+    # The following directives define some format nicknames for use with
+    # a CustomLog directive (see below).
+    #
+    LogFormat "%a %A %h %H %l %m %s %t %u %U \"%{Referer}i\"" combined
+    LogFormat "%h %l %u %t \"%r\" %>s %b" common
+
+    <IfModule logio_module>
+      # You need to enable mod_logio.c to use %I and %O
+      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
+    </IfModule>
+
+    #
+    # The location and format of the access logfile (Common Logfile Format).
+    # If you do not define any access logfiles within a <VirtualHost>
+    # container, they will be logged here.  Contrariwise, if you *do*
+    # define per-<VirtualHost> access logfiles, transactions will be
+    # logged therein and *not* in this file.
+    #
+    #CustomLog "logs/access.log" common
+
+    #
+    # If you prefer a logfile with access, agent, and referer information
+    # (Combined Logfile Format) you can use the following directive.
+    #
+    CustomLog "logs/access.log" combined
+</IfModule>
+
+<IfModule alias_module>
+    #
+    # Redirect: Allows you to tell clients about documents that used to 
+    # exist in your server's namespace, but do not anymore. The client 
+    # will make a new request for the document at its new location.
+    # Example:
+    # Redirect permanent /foo http://www.example.com/bar
+
+    #
+    # Alias: Maps web paths into filesystem paths and is used to
+    # access content that does not live under the DocumentRoot.
+    # Example:
+    # Alias /webpath /full/filesystem/path
+    #
+    # If you include a trailing / on /webpath then the server will
+    # require it to be present in the URL.  You will also likely
+    # need to provide a <Directory> section to allow access to
+    # the filesystem path.
+
+    #
+    # ScriptAlias: This controls which directories contain server scripts. 
+    # ScriptAliases are essentially the same as Aliases, except that
+    # documents in the target directory are treated as applications and
+    # run by the server when requested rather than as documents sent to the
+    # client.  The same rules about trailing "/" apply to ScriptAlias
+    # directives as to Alias.
+    #
+    ScriptAlias "/cgi-bin/" "C:/xampp/cgi-bin/"
+
+</IfModule>
+
+<IfModule cgid_module>
+    #
+    # ScriptSock: On threaded servers, designate the path to the UNIX
+    # socket used to communicate with the CGI daemon of mod_cgid.
+    #
+    #Scriptsock cgisock
+</IfModule>
+
+#
+# "C:/xampp/cgi-bin" should be changed to whatever your ScriptAliased
+# CGI directory exists, if you have that configured.
+#
+<Directory "C:/xampp/cgi-bin">
+    AllowOverride All
+    Options +ExecCGI
+    Require all granted
+</Directory>
+
+<IfModule mime_module>
+    #
+    # TypesConfig points to the file containing the list of mappings from
+    # filename extension to MIME-type.
+    #
+    TypesConfig conf/mime.types
+
+    #
+    # AddType allows you to add to or override the MIME configuration
+    # file specified in TypesConfig for specific file types.
+    #
+    #AddType application/x-gzip .tgz
+    #
+    # AddEncoding allows you to have certain browsers uncompress
+    # information on the fly. Note: Not all browsers support this.
+    #
+    #AddEncoding x-compress .Z
+    #AddEncoding x-gzip .gz .tgz
+    #
+    # If the AddEncoding directives above are commented-out, then you
+    # probably should define those extensions to indicate media types:
+    #
+    AddType application/x-compress .Z
+    AddType application/x-gzip .gz .tgz
+
+    #
+    # AddHandler allows you to map certain file extensions to "handlers":
+    # actions unrelated to filetype. These can be either built into the server
+    # or added with the Action directive (see below)
+    #
+    # To use CGI scripts outside of ScriptAliased directories:
+    # (You will also need to add "ExecCGI" to the "Options" directive.)
+    #
+    AddHandler cgi-script .cgi
+
+    # For type maps (negotiated resources):
+    #AddHandler type-map var
+
+    #
+    # Filters allow you to process content before it is sent to the client.
+    #
+    # To parse .shtml files for server-side includes (SSI):
+    # (You will also need to add "Includes" to the "Options" directive.)
+    #
+    AddType text/html .shtml
+    AddOutputFilter INCLUDES .shtml
+</IfModule>
+
+#
+# The mod_mime_magic module allows the server to use various hints from the
+# contents of the file itself to determine its type.  The MIMEMagicFile
+# directive tells the module where the hint definitions are located.
+#
+<IfModule mime_magic_module>
+    #
+    # The mod_mime_magic module allows the server to use various hints from the
+    # contents of the file itself to determine its type.  The MIMEMagicFile
+    # directive tells the module where the hint definitions are located.
+    #
+    MIMEMagicFile "conf/magic"
+</IfModule>
+
+
+#
+# Customizable error responses come in three flavors:
+# 1) plain text 2) local redirects 3) external redirects
+#
+# Some examples:
+#ErrorDocument 500 "The server made a boo boo."
+#ErrorDocument 404 /missing.html
+#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
+#ErrorDocument 402 http://www.example.com/subscription_info.html
+#
+
+#
+# MaxRanges: Maximum number of Ranges in a request before
+# returning the entire resource, or one of the special
+# values 'default', 'none' or 'unlimited'.
+# Default setting is to accept 200 Ranges.
+#MaxRanges unlimited
+
+#
+# EnableMMAP and EnableSendfile: On systems that support it, 
+# memory-mapping or the sendfile syscall may be used to deliver
+# files.  This usually improves server performance, but must
+# be turned off when serving from networked-mounted 
+# filesystems or if support for these functions is otherwise
+# broken on your system.
+# Defaults: EnableMMAP On, EnableSendfile Off
+#
+#EnableMMAP off
+#EnableSendfile off
+
+# Supplemental configuration
+#
+# The configuration files in the conf/extra/ directory can be 
+# included to add extra features or to modify the default configuration of 
+# the server, or you may simply copy their contents here and change as 
+# necessary.
+
+# Server-pool management (MPM specific)
+Include conf/extra/httpd-mpm.conf
+
+# Multi-language error messages
+Include conf/extra/httpd-multilang-errordoc.conf
+
+# Fancy directory listings
+Include conf/extra/httpd-autoindex.conf
+
+# Language settings
+Include conf/extra/httpd-languages.conf
+
+# User home directories
+Include conf/extra/httpd-userdir.conf
+
+# Real-time info on requests and configuration
+Include conf/extra/httpd-info.conf
+
+# Virtual hosts
+Include conf/extra/httpd-vhosts.conf
+
+# Local access to the Apache HTTP Server Manual
+#Include conf/extra/httpd-manual.conf
+
+# Distributed authoring and versioning (WebDAV)
+#Attention! WEB_DAV is a security risk without a new userspecific configuration for a secure authentifcation 
+#Include conf/extra/httpd-dav.conf
+
+# Various default settings
+#Include conf/extra/httpd-default.conf
+# Implements a proxy/gateway for Apache.
+Include "conf/extra/httpd-proxy.conf"
+# Various default settings
+Include "conf/extra/httpd-default.conf"
+# XAMPP settings
+Include "conf/extra/httpd-xampp.conf"
+
+# Configure mod_proxy_html to understand HTML4/XHTML1
+<IfModule proxy_html_module>
+Include conf/extra/proxy-html.conf
+</IfModule>
+
+# Secure (SSL/TLS) connections
+#Include conf/extra/httpd-ssl.conf
+#
+# Note: The following must must be present to support
+#       starting without SSL on platforms with no /dev/random equivalent
+#       but a statically compiled-in mod_ssl.
+#
+<IfModule ssl_module>
+SSLRandomSeed startup builtin
+SSLRandomSeed connect builtin
+</IfModule>
+#
+# uncomment out the below to deal with user agents that deliberately
+# violate open standards by misusing DNT (DNT *must* be a specific
+# end-user choice)
+#
+#<IfModule setenvif_module>
+#BrowserMatch "MSIE 10.0;" bad_DNT
+#</IfModule>
+#<IfModule headers_module>
+#RequestHeader unset DNT env=bad_DNT
+#</IfModule>
+
+# XAMPP: We disable operating system specific optimizations for a listening
+# socket by the http protocol here. IE 64 bit make problems without this.
+
+AcceptFilter http none
+
+# AJP13 Proxy
+<IfModule mod_proxy.c>
+<IfModule mod_proxy_ajp.c>
+Include "conf/extra/httpd-ajp.conf"
+</IfModule>
+</IfModule>

conf/my.ini

@@ -0,0 +1,187 @@
+# Example MySQL config file for small systems.
+#
+# This is for a system with little memory (<= 64M) where MySQL is only used
+# from time to time and it's important that the mysqld daemon
+# doesn't use much resources.
+#
+# You can copy this file to
+# C:/xampp/mysql/bin/my.cnf to set global options,
+# mysql-data-dir/my.cnf to set server-specific options (in this
+# installation this directory is C:/xampp/mysql/data) or
+# ~/.my.cnf to set user-specific options.
+#
+# In this file, you can use all long options that a program supports.
+# If you want to know which options a program supports, run the program
+# with the "--help" option.
+
+# The following options will be passed to all MySQL clients
+[client] 
+# password       = your_password 
+port            = 3306 
+socket          = "C:/xampp/mysql/mysql.sock"
+
+
+# Here follows entries for some specific programs 
+
+# The MySQL server
+[mysqld]
+port= 3306
+socket = "C:/xampp/mysql/mysql.sock"
+basedir = "C:/xampp/mysql" 
+tmpdir = "C:/xampp/tmp" 
+datadir = "C:/xampp/mysql/data"
+pid_file = "mysql.pid"
+# enable-named-pipe
+key_buffer = 16M
+max_allowed_packet = 1M
+sort_buffer_size = 512K
+net_buffer_length = 8K
+read_buffer_size = 256K
+read_rnd_buffer_size = 512K
+myisam_sort_buffer_size = 8M
+log_error = "mysql_error.log"
+general_log=1
+log_output=TABLE
+
+# set default timeouts
+connect_timeout=28800
+interactive_timeout=28800
+wait_timeout=28800
+
+# Change here for bind listening
+bind-address="127.0.0.1" 
+# bind-address = ::1          # for ipv6
+
+# Where do all the plugins live
+plugin_dir = "C:/xampp/mysql/lib/plugin/" 
+
+# Don't listen on a TCP/IP port at all. This can be a security enhancement,
+# if all processes that need to connect to mysqld run on the same host.
+# All interaction with mysqld must be made via Unix sockets or named pipes.
+# Note that using this option without enabling named pipes on Windows
+# (via the "enable-named-pipe" option) will render mysqld useless!
+# 
+# commented in by lampp security
+#skip-networking
+#skip-federated
+
+# Replication Master Server (default)
+# binary logging is required for replication
+# log-bin deactivated by default since XAMPP 1.4.11
+#log-bin=mysql-bin
+
+# required unique id between 1 and 2^32 - 1
+# defaults to 1 if master-host is not set
+# but will not function as a master if omitted
+server-id	= 1
+
+# Replication Slave (comment out master section to use this)
+#
+# To configure this host as a replication slave, you can choose between
+# two methods :
+#
+# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
+#    the syntax is:
+#
+#    CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
+#    MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
+#
+#    where you replace <host>, <user>, <password> by quoted strings and
+#    <port> by the master's port number (3306 by default).
+#
+#    Example:
+#
+#    CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
+#    MASTER_USER='joe', MASTER_PASSWORD='secret';
+#
+# OR
+#
+# 2) Set the variables below. However, in case you choose this method, then
+#    start replication for the first time (even unsuccessfully, for example
+#    if you mistyped the password in master-password and the slave fails to
+#    connect), the slave will create a master.info file, and any later
+#    change in this file to the variables' values below will be ignored and
+#    overridden by the content of the master.info file, unless you shutdown
+#    the slave server, delete master.info and restart the slaver server.
+#    For that reason, you may want to leave the lines below untouched
+#    (commented) and instead use CHANGE MASTER TO (see above)
+#
+# required unique id between 2 and 2^32 - 1
+# (and different from the master)
+# defaults to 2 if master-host is set
+# but will not function as a slave if omitted
+#server-id       = 2
+#
+# The replication master for this slave - required
+#master-host     =   <hostname>
+#
+# The username the slave will use for authentication when connecting
+# to the master - required
+#master-user     =   <username>
+#
+# The password the slave will authenticate with when connecting to
+# the master - required
+#master-password =   <password>
+#
+# The port the master is listening on.
+# optional - defaults to 3306
+#master-port     =  <port>
+#
+# binary logging - not required for slaves, but recommended
+#log-bin=mysql-bin
+
+
+# Point the following paths to different dedicated disks
+#tmpdir = "C:/xampp/tmp"
+#log-update = /path-to-dedicated-directory/hostname
+
+# Uncomment the following if you are using BDB tables
+#bdb_cache_size = 4M
+#bdb_max_lock = 10000
+
+# Comment the following if you are using InnoDB tables
+#skip-innodb
+innodb_data_home_dir = "C:/xampp/mysql/data"
+innodb_data_file_path = ibdata1:10M:autoextend
+innodb_log_group_home_dir = "C:/xampp/mysql/data"
+#innodb_log_arch_dir = "C:/xampp/mysql/data"
+## You can set .._buffer_pool_size up to 50 - 80 %
+## of RAM but beware of setting memory usage too high
+innodb_buffer_pool_size = 16M
+innodb_additional_mem_pool_size = 2M
+## Set .._log_file_size to 25 % of buffer pool size
+innodb_log_file_size = 5M
+innodb_log_buffer_size = 8M
+innodb_flush_log_at_trx_commit = 1
+innodb_lock_wait_timeout = 50
+
+## UTF 8 Settings
+#init-connect=\'SET NAMES utf8\'
+#collation_server=utf8_unicode_ci
+#character_set_server=utf8
+#skip-character-set-client-handshake
+#character_sets-dir="C:/xampp/mysql/share/charsets"
+
+[mysqldump]
+quick
+max_allowed_packet = 16M
+
+[mysql]
+no-auto-rehash
+# Remove the next comment character if you are not familiar with SQL
+#safe-updates
+
+[isamchk]
+key_buffer = 20M
+sort_buffer_size = 20M
+read_buffer = 2M
+write_buffer = 2M
+
+[myisamchk]
+key_buffer = 20M
+sort_buffer_size = 20M
+read_buffer = 2M
+write_buffer = 2M
+
+[mysqlhotcopy]
+interactive-timeout