ryan/Apollo-11
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Proof INTEGRATION_INITIALIZATION (#509)

Browse Source 
* Lines 0-115

* 116-363

* 363-800

* 800-1175
This commit is contained in:
Dan Foad
2019-12-05 16:59:12 +00:00
committed by James Harris
parent 10bb1a6b95
commit 060e8fd77d
1 changed files with 95 additions and 103 deletions
Download Patch File Download Diff File Expand all files Collapse all files

198
Comanche055/INTEGRATION_INITIALIZATION.agc
View File

@@ -37,29 +37,29 @@
# FROM A USER'S POINT OF VIEW, ORBITAL INTEGRATION IS ESSENTIALLY THE SAME AS THE 278 INTEGRATION
# PROGRAM. THE SAME ENTRANCES TO THE PROGRAM WILL BE MAINTAINED, THE SAME STALLING ROUTINE WILL BE USED AND
# OUTPUT WILL STILL BE VIA THE PUSHLIST. THE PRIMARY DIFFERENCES TO A USER INVOLVE THE ADDED CAPABILITY OF
# TERMINATING INTEGRATION AT A SPECIFIC FINAL RADIUS AND THE DIFFERENCE IN STATE VECTOR SCALING INSIDE AND OUTSIDE
# THE LUNAR SPHERE OF INFLUENCE.
# TERMINATING INTEGRATION AT A SPECIFIC FINAL RADIUS AND THE DIFFERENCE IN STATE VECTOR SCALING INSIDE AND OUT-
# SIDE THE LUNAR SPHERE OF INFLUENCE.
#
# IN ORDER TO MAKE THE CSM(LEM)PREC AND CSM(LEM)CONIC ENTRANCES SIMILAR TO FLIGHT 278, THE INTEGRATION PROGRAM
# WILL ITSELF SET THE FINAL RADIUS (RFINAL) TO 0 SO THAT REACHING THE DESIRED TIME ONLY WILL TERMINATE
# INTEGRATION. THE DP REGISTER RFINAL MUST BE SET BY USERS OF INTEGRVS AND INTEGRV, AND MUST BE DONE AFTER THE
# CALL TC INTSTALL.
# CALL TO INTSTALL.
#
# WHEN THE LM IS ON THE LUNAR SURFACE (INDICATED BY LUNAR SURFACE FLAG SET) CALLS TO LEMCONIC, LEMPREC, AND
# INTEGRV WITH VINFLAG = 0 WILL RESULT IN THE USE OF THE PLANETARY INERTIAL ORIENTATION SUBROUTINES TO PROVIDE
# BOTH THE LM'S POSITION AND VELOCITY IN THE REFERENCE COORDINATE SYSTEM.
# BOTH THE LMS POSITION AND VELOCITY IN THE REFERENCE COORDINATE SYSTEM.
# THE PROGRAM WILL PROVIDE OUTPUT AS IF INTEGRATION WAS USED. THAT IS, THE PUSHLIST WILL BE SET AS NOTED BELOW AND
# THE PERMANENT STATE VECTOR UPDATED WHEN SPECIFIED BY AN INTEGRV CALL.
#
# USERS OF INTEGRVS DESIRING INTEGRATION (INTYPFLG = 0) SHOULD NOTE THAT THE OBLATENESS PERTURBATION COMPUTATION
# IN LUNAR ORBIT IS TIME DEPENDENT. THEREFORE, THE USER SHOULD SUPPLY AN INITIAL STATE VECTOR VALID AT SOME REAL
# TIME AND THE DESIRED TIME (TDEC1) ALSO AT SOME REAL TIME. FOR CONIC "INTEGRATION" THE USER MAY STILL USE ZERO
# TIME AND THE DESIRED TIME (TDEC1) ALSO AT SOME REAL TIME. FOR CONIC ,,INTEGRATION,, THE USER MAY STILL USE ZERO
# AS THE INITIAL TIME AND DELTA TIME AS THE DESIRED TIME.
#
# 2.0 CENTRAL DESCRIPTION
# -----------------------
#
# THE INTEGRATION PROGRAM OPERATES AS A CLOSED INTERPRETIVE SUBROUTINE AND PERFORMS THESE FUNCTIONS --
# THE INTEGRATION PROGRAM OPERATES AS A CLOSED INTERPRETIVE SUBROUTINE AND PERFORMS THESE FUNCTIONS---
# 1) INTEGRATES (PRECISION OR CONIC) EITHER CSM OR LM STATE VECTOR
# 2) INTEGRATES THE W-MATRIX
# 3) PERMANENT OR TEMPORARY UPDATE OF THE STATE VECTOR
@@ -83,23 +83,23 @@
# SETS STATEFLG (THE NAVIGATION PROGRAMS P20, P22.)
#
# Page 1310
# APPENDIX B OF THE USERS' GUIDE LISTS THE STATE VECTOR QUANTITIES.
# APPENDIX B OF THE USERS GUIDE LISTS THE STATE VECTOR QUANTITIES.
#
# 2.1 RESTARTS
#
# PHASE CHANGES WILL BE MADE IN THE INTEGRATION PROGRAM ONLY FOR THE INTEGRV ENTRANCE (I.E., WHEN THE W-MATRIX IS
# INTEGRATED OR PERMANENT STATE VECTOR IS UPDATED.) THE GROUP NUMBER USED WILL BE THAT FOR THE P20-25 PROGRAMS
# (I.E., GROUP2) WINCE THE INTEGRV ENTRANCE WILL ONLY BE USED BY THESE PROGRAMS. IF A RESTART OCCURS DURING AN
# (I.E., GROUP2) SINCE THE INTEGRV ENTRANCE WILL ONLY BE USED BY THESE PROGRAMS. IF A RESTART OCCURS DURING AN
# INTEGRATION OF THE STATE VECTOR ONLY, THE RECOVERY WILL BE TO THE LAST PHASE IN THE CALLING PROGRAM. CALLING
# PROGRAMS WHICH USE THE INTEGRV OR INTEGRVS ENTRANCE OF INTEGRATION WHOULD ENSURE THAT IF PHASE CHANGING IS DONE
# PROGRAMS WHICH USE THE INTEGRV OR INTEGRVS ENTRANCE OF INTEGRATION SHOULD ENSURE THAT IF PHASE CHANGING IS DONE
# THAT IT IS PRIOR TO SETTING THE INTEGRATION INPUTS IN THE PUSHLIST.
# THIS IS BECAUSE THE PUSHLIST IS LOST DURING A RESTART.
#
# 2.2 SCALING
#
# THE INTEGRATION ROUTINE WILL MAINTAIN THE PERMANENT MEMORY STATE VECTORS IN THE SCALING AND UNITS DEFINED IN
# APPENDIX B OF THE USERS' GUIDE. THE SCALING OF THE OUTPUT POSITION VECTOR DEPENDS ON THE ORIGIN OF THE COORDINATE
# SYSTEM AT THE DESIRED INTEGRATION TIME. THE COORDINATE SYSTEM TRANSFORMATION WILL BE DONE AUTOMATICALLY ON
# APPENDIX B OF THE USERS GUIDE. THE SCALING OF THE OUTPUT POSITION VECTORDEPENDS ON THE ORIGIN OF THE COORDINATE
# SYSTEM AT THE DESIRED INTEGRATION TIME. THE COORDINATE SYSTEM TRANSFORMATION WILL BE DONE AUTOMATICALLY ON
# MULTIPLE TIMESTEP ENCKE INTEGRATION ONLY. THUS IT IS POSSIBLE TO HAVE OUTPUT FROM SUCCESSIVE INTEGRATIONS IN
# DIFFERENT SCALING.
# HOWEVER, RATT, VATT WILL ALWAYS BE SCALED THE SAME.
@@ -107,85 +107,81 @@
# 3.0 INPUT/OUTPUT
# ----------------
#
# PROGRAM INPUTS ARE THE FLAGS DESCRIBED IN APPENDIX A AND THE PERMANENT STATE VECTOR QUANTITIES DESCRIBED IN
# APPENDIX B OF THE USERS' GUIDE, PLUS THE DESIRED TIME TO INTEGRATE TO IN TDEC1 (A PUSH LIST LOCATION).
# FOR INTEGRVS, THE RCV,VCV,TET OR THE TEMPORARY STATE VECTOR MUST BE SET, PLUS MOONFLAG AND MIDFLAG
# PROGRAM INPUTS ARE THE FLAGS DESCRIBED IN APPENDIX A AND THE PERMANENT STATE VECTOR QUANTITIES DESCRIBED IN AP-
# PENDIX B OF THE USERS GUIDE, PLUS THE DESIRED TIME TO INTEGRATE TO IN TDEC1 (A PUSH LIST LOCATION).
# FOR INTEGRVS, THE RCV,VCV, TET OR THE TEMPORARY STATE VECTOR MUST BE SET, PLUS MOONFLAG AND MIDFLAG
#
# FOR SIMULATION THE FOLLOWING QUANTITIES MUST BE PRESET ---
#
# EARTH MOON
# 29 27
# RRECTCSM(LEM) RECTIFIED POSITION VECTOR METERS 2 2
# RRECTCSM(LEM) - RECTIFIED POSITION VECTOR METERS 2 2
#
# 7 5
# VRECTCSM(LEM) RECTIFIED VELOCITY VECTOR M/CSEC 2 2
# VRECTCSM(LEM) - RECTIFIED VELOCITY VECTOR M/CSEC 2 2
#
# 28 28
# TETCSM(LEM) TIME STATE VECTOR IS VALID CSEC 2 2
# TETCSM(LEM) - TIME STATE VECTOR IS VALID CSEC 2 2
# CUSTOMARILY 0, BUT NOTE LUNAR
# ORBIT DEPENDENCE ON REAL TIME.
#
# 22 18
# DELTAVCSM(LEM) POSITION DEVIATION METERS 2 2
# DELTAVCSM(LEM) - POSITION DEVIATION METERS 2 2
# 0 IF TCCSM(LEM) = 0
#
# 3 -1
# NUVCSM(LEM) VELOCITY DEVIATION M/CSEC 2 2
# NUVCSM(LEM) - VELOCITY DEVIATION M/CSEC 2 2
# 0 IF TCCSM(LEM) = 0
# Page 1311
# 29 27
# RCVSM(LEM) CONIC POSITION METERS 2 2
# RCVCSM(LEM) - CONIC POSITION METERS 2 2
# EQUALS RRECTCSM(LEM) IF
# TCCSM(LEM) = 0
#
# 7 5
# VCVCSM(LEM) CONIC VELOCITY M/CSEC 2 2
# VCVCSM(LEM) - CONIC VELOCITY M/CSEC 2 2
# EQUALS VRECTCSM(LEM) IF
# TCCSM(LEM) = 0
#
# 28 28
# TCCSM(LEM) TIME SINCE RECTIFICATION CSECS 2 2
# TCCSM(LEM) - TIME SINCE RECTIFICATION CSECS 2 2
# CUSTOMARILY 0
#
# 1/2 17 16
# XKEPCSM(LEM) RDOT OF KEPLER'S EQUATION M 2 2
# XKEPCSM(LEM) - RDOT OF KEPLER'S EQUATION M 2 2
# 0 IF TCCSM(LEM) = 0
#
# CMOONFLG PERMANENT FLAGS CORRESPONDING 0 0
# CMOONFLG - PERMANENT FLAGS CORRESPONDING 0 0
# CMIDFLAG TO MOONFLAG AND MIDFLAG 0,1 0,1
# LMOONFLG C = CSM, L = LM 0 0
# LMIDFLG 0,1 0,1
#
# SURFFLAG LUNAR SURFACE FLAG 0,1 0,1
# SURFFLAG - LUNAR SURFACE FLAG 0,1 0,1
#
# IN ADDITION, IF (L)CMIDFLAG IS SET, THE INITIAL INPUT VALUES FOR LUNAR
# SOLAR EPHEMERIDES SUBROUTINE AND PLANETARY INERTIAL ORIENTATION SUB-
# ROUTINE MUST BE PRESET.
#
# OUTPUT
# AFTER EVERY CALL TO INTEGRATION
# AFTER EVERY CALL TO INTEGRATION
# EARTH MOON
# 29 29
# 0D RATT POSITION METERS 2 2
#
# 7 7
# 6D VATT VELOCITY M/CSEC 2 2
#
# 28 28
# 12D TAT TIME 2 2
#
# 12D TAT TIME 2 2
# 29 27
# 14D RATT1 POSITION METERS 2 2
#
# 14D RATT1 POSITION METERS 2 2
# 7 5
# 20D VATT1 VELOCITY M/CSEC 2 2
#
# 20D VATT1 VELOCITY M/CSEC 2 2
# 3 2 36 30
# 26D MU(P) MU M /CS 2 2
# 26D MU(P) MU M /CS 2 2
#
# X1 MUTABLE ENTRY -2 -10D
# X1 MUTABLE ENTRY -2 -10D
#
# X2 COORDINT
# X2 COORDINATE SYSTEM ORIGIN 0 2
# X2 COORDINT
# X2 COORDINATE SYSTEM ORIGEN 0 2
# (THIS, NOT MOONFLAG, SHOULD BE
# Page 1312
# USED TO DETERMINE ORIGIN.)
@@ -198,17 +194,17 @@
# 4.0 CALLING SEQUENCES AND SAMPLE CODE
# -------------------------------------
#
# A) PRECISION ORBITAL INTEGRATION. CSMPREC, LEMPREC ENTRANCES
# L-X STORE TIME TO 96T5791T5 T 95 PUS L9ST (T4531)
# A) PRECISION ORBITAL INTEGRATION. CSMPREC,LEMPREC ENTRANCES
# L-X STORE TIME TO 96T5791T5 T 95 PUS L9ST (T4531)
# L CALL
# L+1 CSMPREC (OR LEMPREC)
# L+2 RETURN
# INPUT 28
# TDEC1 (PD 32D) TIME TO INTEGRATE TO...CENTISECONDS SCALED 2
# OUTPUT
# THE DATA LISTED IN SECTION 3.2 PLUS
# THE DATA LISTED IN SECTION 3.0 PLUS
# RQVV POSITION VECTOR OF VEHICLE WITH RESPECT TO SECONDARY
# BODY... METERS B-29 ONLY IF MIDFLAG = DIM0FLAG = 1
# BODY... METERS B-29 ONLY IF MIDFLAG = DIMOFLAG = 1
# B) CONIC INTEGRATION. CSMCONIC, LEMCONIC ENTRANCES
# L-X STORE TIME IN PUSH LIST (TDEC1)
# L CALL
@@ -237,32 +233,32 @@
# INPUT
# RCV POSITION VECTOR METERS
# VCV VELOCITY VECTOR M/CSEC
# TET TIME OF STATE VECTOR (MAY = 0) CSEC B-28
# TET TIME OF STATE VECTOR(MAY = 0) CSEC B-28
# Page 1313
# TDEC1 TIME TO INTEGRATE TO CSEC B-28 (PD 32D)
# (MAY BE INCREMENT IF TET=0)
# OUTPUT
# SAME AS FOR PRECISION OR CONIC INTEGRATION,
# DEPENDING ON INTYPFLG.
# D) INTEGRATE STATE VECTOR. INTGRV ENTRANCE
# L-X STORE TIME IN PUSH LIST (TDEC1) (MAY BE DONE AFTER CALL TO INTSTALL)
# D) INTEGRATE STATE VECTOR.INTGRV ENTRANCE
# L-X STORE TIME IN PUSH LIST (TDEC1)(MAY BE DONE AFTER CALL TO INTSTALL)
# L-8 CALL
# L-7
# L-6 SET(CLEAR) SET(CLEAR)
# L-5 VINTFLAG 1=CSM, 0=LM
# L-4 INTYPFLAG 1=CONIC, 0=PRECISION
# L-3 SET(CLEAR) SET(CLEAR)
# L-2 DIM0FLAG 1=W-MATRIX, 0=NO W-MATRIX
# L-2 DIMOFLAG 1=W-MATRIX, 0=NO W-MATRIX
# L-1 D6OR9FLG 1=9X9, 0=6X6
# L SET DLOAD
# L+1 STATEFLG DESIRE PERMANENT UPDATE
# L+2 FINAL RAD. OF STATE VECTOR
# L+2 FINAL RAD. OF STATE VECTOR
# L+3 STCALL RFINAL
# L+4 INTEGRV
# L CALL NORMAL USE -- WILL UPDATE STATE
# L+1 INTEGRV VECTOR IF DIM0FLAG=1. (STATEFLG IS
# L CALL NORMAL USE-- WILL UPDATE STATE
# L+1 INTEGRV VECTOR IF DIMOFLAG=1.(STATEFLG IS
# L+2 RETURN ALWAYS RESET IN INTEGRATION AFTER
# IT USED.)
# IT IS USED.)
# INPUT
# TDEC1 (PD 32D) TIME TO INTEGRATE TO CSEC B-28
# OUTPUT
@@ -356,7 +352,7 @@ MOVEACSM TC SETBANK
TS RRECTCSM
CCS DIFEQCNT # IS TRANSFER COMPLETE
TCF MOVEACSM +1 # NO-LOOP
TC DANZIG # COMPLETE -- RETURN
TC DANZIG # COMPLETE- RETURN
# PTOACSM TRANSFERS RRECTCSM TO RRECTCSM +41 TO RRECT TO RRECT +41
#
@@ -475,15 +471,15 @@ INTBANK BBCON INTEGRV
# SPECIAL PURPOSE ENTRIES TO ORBITAL INTEGRATION. THESE ROUTINES PROVIDE ENTRANCES TO INTEGRATION WITH
# APPROPRIATE SWITCHES SET OR CLEARED FOR THE DESIRED INTEGRATION.
#
# CSMPREC AND LEMPREC PERFORM ORBIT INTEGRATION BY THE ENCKE METHOD TO THE TIME INDICATED IN TDEC1.
# CSMPREC AND LEMPREC PERFORM ORBIT INTEGRATION BY THE ENCKE METHOD TO THE TIME INDICATED IN TDEC1
# ACCELERATIONS DUE TO OBLATENESS ARE INCLUDED. NO W-MATRIX INT. IS DONE.
# THE PERMANENT STATE VECTOR IS NOT UPDATED.
# CSMCONIC AND LEMCONIC PERFORM ORBIT INTEG. BY KEPLER'S METHOD TO THE TIME INDICATED IN TDEC1.
# CSMCONIC AND LEMCONIC PERFORM ORBIT INTEG. BY KEPLERS METHOD TO THE TIME INDICATED IN TDEC1
# NO DISTURBING ACCELERATIONS ARE INCLUDED. IN THE PROGRAM FLOW THE GIVEN
# STATE VECTOR IS RECTIFIED BEFORE SOLUTION OF KEPLER'S EQUATION.
# STATE VECTOR IS RECTIFIED BEFORE SOLUTION OF KEPLERS EQUATION
#
# THE ROUTINES ASSUME THAT THE CSM (LEM) STATE VECTOR IN P-MEM IS VALID.
# SWITCHES SET PRIOR TO ENTRY TO THE MAIN INTEG. PROG ARE AS FOLLOWS:
# SWITCHES SET PRIOR TO ENTRY TO THE MAIN INTEG. PROG ARE AS FOLLOWS
# CSMPREC CSMCONIC LEMPREC LEMCONIC
# VINTFLAG SET SET CLEAR CLEAR
# INTYPFLG CLEAR SET CLEAR SET
@@ -491,21 +487,22 @@ INTBANK BBCON INTEGRV
# Page 1318
#
# CALLING SEQUENCE
# L-X STORE TDEC1
# L-X STORE TDEC1
# L CALL (STCALL TDEC1)
# L+1 CSMPREC (CSMCONIC, LEMPREC, LEMCONIC)
#
# NORMAL EXIT TO L+2
#
#
# SUBROUTINES CALLED
# INTEGRV1
# PRECOUT FOR CSMPREC AND LEMPREC
# CONICOUT FOR CSMCONIC AND LEMCONIC
#
# OUTPUT -- SEE PAGE 2 OF THIS LOG SECTION
# OUTPUT - SEE PAGE 2 OF THIS LOG SECTION
#
# INPUT
# TDEC1 TIME TO INTEGRATE TO. CSECS B-28
# TDEC1 TIME TO INTEGRATE TO . CSECS B-28
CSMPREC STQ CALL
X1
@@ -569,21 +566,19 @@ INTEGRVS SET SSP
RPQFLAG
ALOADED
# INTEGRV IS AN ENTRY TO ORBIT INTEGRATION WHICH PERMITS THE CALLER,
# NORMALLY THE NAVIGATION PROGRAM, TO SET THE INTEG. FLAGS. THE ROUTINE
# IS ENTERED AT INTEGRV1 BY CSMPREC ET. AL. AND AT ALOADED BY INTEGRVS.
# INTEGRV IS AN ENTRY TO ORBIT INTEGRATION WHICH PERMITS THE CALLER ,
# NORMALLY THE NAVIGATION PROGRAM ,TO SET THE INTEG. FLAGS. THE ROUTINE
# IS ENTERED AT INTEGRV1 BY CSMPREC ET.AL. AND AT ALOADED BY INTEGRVS.
# THE ROUTINE SETS UP A-MEMORY IF ENTERED AT INTEGRV,1 AND SETS THE INTEG.
# PROGRAM FOR PRECISION OR CONIC.
#
# THE CALLER MUST FIRST CALL INTSTALL TO CHECK IF INTEG. IS IN USE BEFORE
# SETTING ANY FLAGS.
#
# THE FLAGS WHICH SHOULD BE SET OR CLEARED ARE
# VINTFLAG (IGNORED WHEN ENTERED FROM INTEGRVS)
# INTYPFLG
# DIM0FLAG
# D6OR9FLG
#
# CALLING SEQUENCE
# L-X CALL
# L-Y INTSTALL
@@ -591,7 +586,6 @@ INTEGRVS SET SSP
# AND DIM0FLAG IS CLEAR.
# L CALL
# L+1 INTEGRV
#
# INITIALIZATION
# FLAGS AS ABOVE
# STORE TIME TO INTEGRATE TO IN TDEC1
@@ -627,7 +621,7 @@ ALOADED DLOAD
BANK
A-PCHK BOF CALL
MIDFLAG
ANDOUT # DON'T MAKE ORIGIN CHANGE CHECK
ANDOUT # DONT MAKE ORIGIN CHANGE CHECK
CHKSWTCH
BPL CALL
ANDOUT # NO ORIGIN CHANGE
@@ -728,7 +722,7 @@ NORFINAL DLOAD DMP
MUEARTH,2
SQRT DMP
.3D
SR3 SR4 # DT IS TRUNCATED TO A MULTIPLE
SR3 SR4 # DT IS TRUNCATED TO A MULTIPLE
DLOAD SL
MPAC
15D # OF 128 CSECS.
@@ -789,8 +783,8 @@ P00HCHK DLOAD ABS
BMN # NO BACKWARD INTEGRATION
INTEXIT
PDDL SR4
DT/2 # IS 4(DT) LS (TDEC - TET)
SR2R BDSU
DT/2 # IS 4(DT) LS(TDEC - TET)
SR2R BDSU # NO
BMN GOTO
INTEXIT
TIMESTEP
@@ -820,7 +814,7 @@ INTWAKE CS RASFLAG # IS THIS INTSTALLED ROUTINE TO BE
INDEX FIXLOC
CA QPRET
TS TBASE2 # YES, DON'T RESTART WITH SOMEONE ELSE'S Q
TS TBASE2 # YES, DONT RESTART WITH SOMEONE ELSES Q
TC PHASCHNG
OCT 04022
@@ -832,7 +826,7 @@ INTWAKE CS RASFLAG # IS THIS INTSTALLED ROUTINE TO BE
CAF REINTBIT
MASK RASFLAG
EXTEND
BZF GOBAC # DON'T INTWAKE IF WE CAME HERE VIA RESTART
BZF GOBAC # DONT INTWAKE IF WE CAME HERE VIA RESTART
INTWAKE1 CAF ZERO
WAKE TS STALTEM # INDEX OF ANY STALL USER
@@ -877,10 +871,10 @@ INTBITAB OCT 20100
# AVETOMID
#
# THIS ROUTINE PERFORMS THE TRANSITION FROM A THRUSTING PHASE TO THE COAST
# PHASE BY INITIALIZING THIS VEHICLE'S PERMANENT STATE VECTOR WITH THE
# PHASE BY INITIALIZING THIS VEHICLES PERMANENT STATE VECTOR WITH THE
# VALUES LEFT BY THE AVERAGEG ROUTINE IN RN,VN,PIPTIME.
#
# BEFORE THIS IS DONE THE W-MATRIX, IF IT'S VALID (OR WFLAG OR RENDWFLT IS
# BEFORE THIS IS DONE THE W-MATRIX, IF ITS VALID (ORWFLAG OR RENDWFLT IS
# SET) IS INTEGRATED FORWARD TO PIPTIME WITH THE PRE-THRUST STATE VECTOR.
#
# IN ADDITION, THE OTHER VEHICLE IS INTEGRATED (PERMANENT) TO PIPTIME.
@@ -894,12 +888,12 @@ INTBITAB OCT 20100
AVETOMID STQ BON
EGRESS
RENDWFLG
INT/W # W-MATRIX VALID, GO INTEGRATE IT
INT/W # W-MATRIX VALID ,GO INTEGRATE IT
BON
ORBWFLAG
INT/W # W-MATRIX VALID, GO INTEGRATE IT.
INT/W # W-MATRIX VALID ,GO INTEGRATE IT
SETCOAST AXT,2 CALL # NOW MOVE PROPERLY SCALED RN,UN AS WELL AS
SETCOAST AXT,2 CALL # NOW MOVE PROPERLY SCALED RN,VN AND
2 # PIPTIME TO INTEGRATION ERASABLES.
INTSTALL
BON AXT,2
@@ -945,7 +939,7 @@ INT/W DLOAD CALL
INTSTALL
SET SET
DIM0FLAG # DO W-MATRIX
AVEMIDSW # SO WON'T CLOBBER RN,VN,PIPTIME
AVEMIDSW # SO WONT CLOBBER RN,VN,PIPTIME
CLEAR SET
D6OR9FLG
VINTFLAG
@@ -959,27 +953,27 @@ INT/W DLOAD CALL
#
# THIS ROUTINE INTEGRATES (PRECISION) TO THE TIME SPECIFIED IN TDEC1.
# IF, AT THE END OF AN INTEGRATION TIME STEP, CURRENT TIME PLUS A DELTA
# TIME (SEE TIMEDELT.....BASED ON THE COMPUTATION TIME FOR ONE TIME STEP)
# TIME (SEE TIMEDELT.....BASED ON THE COMPUTATUON TIME FOR ONE TIME STEP)
# IS GREATER THAN THE DESIRED TIME, ALARM 1703 IS SET AND THE INTEGRATION
# IS DONE TO THE CURRENT TIME.
# IS DONE AS IT IS FOR MIDTOAV2.
# RETURN IS IN BASIC TO THE RETURN ADDRESS PLUS ONE.
#
# IF THE INTEGRATION IS FINISHED TO THE DESIRED TIME, RETURN IS IN BASIC
# TO THE RETURN ADDRESS.
#
# IN EITHER CASE, BEFORE RETURNING, THE EXTRAPOLATED STATE VECTOR IS TRANSFERRED
# FROM R,VATT TO R,VN1 -- PIPTIME1 IS SET TO THE FINISHING INTEGRATION
# TIME AND MPAC IS SET TO THE DELTA TIME --
# TAT MINUS CURRENT TIME
# IN EITHER CASE , BEFORE RETURNING, THE EXTRAPOLATED STATE VECTOR IS TRAN
# FERRED FROM R,VATT TO R,VN1-PIPTIME1 IS SET TO THE FINISHING INTEGRA-
# TION TIME AND MPAC IS SET TO THE DELTA TIME---
# TAT MINUS CURRENT TIME.
# MIDTOAV2
#
# THIS ROUTINE INTEGRATES THIS VEHICLE'S STATE VECTOR TO THE CURRENT TIME PLUS
# THIS ROUTINE INTEGRATES THE CSM STATE VECTOR TO CURRENT TIME PLUS
# INCREMENTS OF TIMEDELT SUCH THAT THE DIFFERENCE BETWEEN CURRENT TIME
# AND THE STATE VECTOR TIME AT THE END OF THE LAST STEP IS AT LEAST 5.6
# SECS.
# NO INPUTS ARE REQUIRED OF THE CALLER. RETURN IS IN BASIC TO THE RETURN
# ADDRESS WITH THE ABOVE TRANSFERS TO R,VN1 -- PIPTIME1 -- AND MPAC DONE
# ADDRESS WITH THE ABOVE TRANSFERS TO R,VN1-PIPTIME1-AND MPAC DONE
SETLOC INTINIT
BANK
@@ -999,13 +993,13 @@ MIDTOAV1 STQ CALL
SET RTB
MID1FLAG
LOADTIME
DAD BDSU # INITIAL CHECK, IS TDEC1 IN THE FUTURE
DAD BDSU # INITIAL CHECK.IS TDEC1 IN THE FUTURE.
TIMEDELT
TDEC1
BPL CALL
ENTMID1
# Page 1330
NOTIME # NO, SET ALARM, SWITCH TO MIDTOAV2
NOTIME # NO SET ALARM.SWITCH TO MIDTOAV2
ENTMID2 RTB DAD
LOADTIME
@@ -1019,7 +1013,7 @@ ENTMID1 CLEAR CALL
INTYPFLG
MIDAVFLG # LET INTEG. KNOW THE CALL IS FOR MIDTOAV.
CALL
INTEGRV # GO INTEGRATE
INTEGRV # GO INTEGRATE
SXA,2 SXA,1
RTX2
RTX1
@@ -1077,9 +1071,9 @@ MID2 DLOAD DSU
TET
DSU BPL
5.6SECS
A-PCHK # YES. GET OUT.
A-PCHK # YES,GET OUT.
DLOAD DAD # NO. ADD TIMEDELT TO T-TO-ADD AND TRY
DLOAD DAD # NO,ADD TIMEDELT TO T-TO-ADD AND TRY
T-TO-ADD # AGAIN.
TIMEDELT
STCALL T-TO-ADD
@@ -1121,17 +1115,17 @@ INTWAKEU RELINT
UPSVFLAG # REQUEST. IF NOT GO TO INTWAKUP.
INTWAKUP
VLOAD # MOVE PRECT(6) AND VRECT(6) INTO
RRECT # RCV(6) AND VCV(6) RESPECTIVELY.
VLOAD # MOVE RRECT(6) AND VRECT(6) INTO
RRECT # RCV(6) AND VCV(6) RESPECTIVELY.
STOVL RCV
VRECT # NOW GO TO `RECTIFY +13D' TO
CALL # STORE VRECT INTO VCV AND ZERO OUT
RECTIFY +13D # TDELTAV(6),TNUV(6),TC(2), AND XKEP(2)
SLOAD ABS # COMPARE ABSOLUTE VALUE OF `UPSVFLAG'
UPSVFLAG # TO `UPDATE MOON STATE VECTOR CODE'
VRECT # NOW GO TO 'RECTIFY +13D' TO
CALL # STORE VRECT INTO VCV AND ZERO OUT
RECTIFY +13D # TDELTAV(6),TNUV(6),TC(2) AND XKEP(2)
SLOAD ABS # COMPARE ABSOLUTE VALUE OF 'UPSVFLAG'
UPSVFLAG # TO 'UPDATE MOON STATE VECTOR CODE'
DSU BZE # TO DETERMINE WHETHER THE STATE VECTOR TO
UPMNSVCD # BE UPDATED IS IN THE EARTH OR LUNAR
INTWAKEM # SPHERE OF INFLUENCE........
INTWAKEM # SPHERE OF INFLUENCE.........
AXT,2 CLRGO # EARTH SPHERE OF INFLUENCE.
DEC 0
MOONFLAG
@@ -1142,7 +1136,7 @@ INTWAKEM AXT,2 SET # LUNAR SPHERE OF INFLUENCE.
INTWAKEC SLOAD BMN # COMMON CODING AFTER X2 INITIALIZED AND
# MOONFLAG SET (OR CLEARED).
UPSVFLAG # IS THIS A REQUEST FOR A LEM OR CSM
INTWAKLM # STATE VECTOR UPDATE......
INTWAKLM # STATE VECTOR UPDATE......
CALL # UPDATE CSM STATE VECTOR
ATOPCSM
@@ -1150,17 +1144,17 @@ INTWAKEC SLOAD BMN # COMMON CODING AFTER X2 INITIALIZED AND
ORBWFLAG
INTWAKEX
INTWAKLM CALL # UPDATE LM STATE VECTOR
INTWAKLM CALL # UPDATE LM STATE VECTOR
ATOPLEM
INTWAKEX CLEAR
RENDWFLG
INTWAKUP SSP CALL # REMOVE `UPDATE STATE VECTOR INDICATOR'
INTWAKUP SSP CALL # REMOVE :UPDATE STATE VECTOR INDICATOR:
# Page 1333
UPSVFLAG
0
INTWAKE0 # RELEASE `GRAB' OF ORBIT INTEG.
INTWAKE0 # RELEASE :GRAB: OF ORBIT INTEG
EXIT
TC PHASCHNG
@@ -1178,5 +1172,3 @@ GRP2PC STQ EXIT
GOTO
GRP2SVQ